Загрузка страницы

Just About Sailing September 2019 - DIY Holding Tank Pt3 - Thru hull & Seacock install

This video went on a bit longer than anticipated, but so did the install process. First a bit of an update, then a detailed look at fitting the new Forespar Series 93 2" combined thru-hull and seacock for the holding tank waste outlet.
This is how I did it - I am not suggesting it is how you should do it.
And I needed to drill a new hole in the boat below the waterline - never a pleasant experience.

Видео Just About Sailing September 2019 - DIY Holding Tank Pt3 - Thru hull & Seacock install канала Just about sailing
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
7 сентября 2019 г. 4:18:16
00:30:07
Другие видео канала
Just About Sailing October 2019 - fixing a foot long crack in the hull of my boatJust About Sailing October 2019 - fixing a foot long crack in the hull of my boatJust About Sailing July 2019 - DIY Holding Tank Pt 2 - I have a new apprenticeJust About Sailing July 2019 - DIY Holding Tank Pt 2 - I have a new apprenticeSail Life - DIY osmosis repair and Trudesign Seacocks (thru hull and ball valves)Sail Life - DIY osmosis repair and Trudesign Seacocks (thru hull and ball valves)Installing Groco Seacocks and Backing BlocksInstalling Groco Seacocks and Backing BlocksJust About Sailing September 2021 - Engines woes, de-oxidising the paintwork and windlass removalJust About Sailing September 2021 - Engines woes, de-oxidising the paintwork and windlass removalChinese Diesel Air Heaters - Part 8 - Exhaust and MufflersChinese Diesel Air Heaters - Part 8 - Exhaust and MufflersJust About Sailing November 2020 - The Dinghy - fitting wheels, puncture repair and outboard startJust About Sailing November 2020 - The Dinghy - fitting wheels, puncture repair and outboard startHallberg Rassy 312 "Ellös" -Sea4See - The "True" Hull FittingsHallberg Rassy 312 "Ellös" -Sea4See - The "True" Hull FittingsDIY - How to install an Outhouse? Part 1 - Outhouse storage tank install!DIY - How to install an Outhouse? Part 1 - Outhouse storage tank install!Just About Sailing July 2021 - Finishing the Galley (almost) and Fitting the Handrail (sort of)Just About Sailing July 2021 - Finishing the Galley (almost) and Fitting the Handrail (sort of)Just About Sailing March 2019 - Installing a Chinese Diesel Heater, Pt 2 Fitting it and switching onJust About Sailing March 2019 - Installing a Chinese Diesel Heater, Pt 2 Fitting it and switching onSailing Vessel The Bottom Line: Boat Projects - Holding TankSailing Vessel The Bottom Line: Boat Projects - Holding TankFiberglass Hull Repair how to easily fix a thru hull holeFiberglass Hull Repair how to easily fix a thru hull holeThe TRU Thru-Hull Installation : Chuffed Adventures S03Ep6The TRU Thru-Hull Installation : Chuffed Adventures S03Ep6Just About Sailing June 2019 - A moving experience with my boatJust About Sailing June 2019 - A moving experience with my boatJust About Sailing December 2020 - New windlass install, Pt 3 - Deck modification and strengtheningJust About Sailing December 2020 - New windlass install, Pt 3 - Deck modification and strengtheningJust About Sailing May 2 2017 - The Journey pt 8, Falmouth to Plymouth then on towards PortlandJust About Sailing May 2 2017 - The Journey pt 8, Falmouth to Plymouth then on towards PortlandJust About Sailing March 2018 - Fixing the Rudder, Pt 3 Expanding Epoxy tests, Putting it togetherJust About Sailing March 2018 - Fixing the Rudder, Pt 3 Expanding Epoxy tests, Putting it togetherSufferin' Seacocks, Wind over Water, Episode #88Sufferin' Seacocks, Wind over Water, Episode #88One Less HOLE In The Boat - Apply A DIY Fiberglass Hull Patch (Boat Work: Sailing 9 LIVES)One Less HOLE In The Boat - Apply A DIY Fiberglass Hull Patch (Boat Work: Sailing 9 LIVES)
Яндекс.Метрика