Bosch Truvo Digital Detector : Switch on, detect and drill

The Truvo detector from Bosch locates iron, non-ferrous metals and electrical cables, making it easier to identify potentially hazardous areas.

Before using a drill to hang pictures, mirrors, towel rails, curtains, shelves, cupboards or lamps, it is important to check the wall into which the holes are to be drilled.

The Truvo can detect ferrous metals at depths of up to 7 cm and non-ferrous metals at depths of up to 6 cm. Also, it can detect electrical cables at depths of up to 5 cm.

Once the Truvo has been switched on, it is ready for use right away. No settings need to be adjusted as the detector calibrates itself automatically.

A straightforward LED traffic light system indicates whether it is advisable to drill at the desired location or not: Green means that no obstacles have been detected. Yellow means that drilling is not advisable. Red means that drilling should not be carried out at this point. In addition to the red light, a signal also sounds with varying volume. If metal is detected, the audible signal is continuous and the LED is continuously lit, whereas if electrical current is detected, the audible signal is intermittent and the LED flashes quickly.

The Truvo is a breeze to operate, since there is just one button for switching it on and off. At just 150 g, this compact device is comfortable to hold.
Find out more here: https://www.bosch-do-it.com/gb/en/diy/tools/truvo-3165140853651-199930.jsp

Green power tools for DIY enthusiasts: https://www.bosch-do-it.com/gb/en/diy/homepage/index.jsp

Visit us on Facebook: https://www.facebook.com/BoschDIYpowertoolsUK

Видео Bosch Truvo Digital Detector : Switch on, detect and drill канала Bosch DIY and Garden UK