#11 Setting up the Access Layer
In this video we start configuring our new network. We start by configuring the access layer before moving onto the Distribution layer. At the access layer we will be setting up port security, disabling cdp on our trunks, putting portfast on our access ports, and assigning ports to vlans and limiting the trunk vlan output.
Download the Packet Tracer file to follow along here:
https://www.dropbox.com/s/4onf7tvayb5d52l/%2311%20Setting%20up%20the%20Access%20Layer.pkt?dl=0
Видео #11 Setting up the Access Layer канала Toasty Answers
Download the Packet Tracer file to follow along here:
https://www.dropbox.com/s/4onf7tvayb5d52l/%2311%20Setting%20up%20the%20Access%20Layer.pkt?dl=0
Видео #11 Setting up the Access Layer канала Toasty Answers
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
OpenVPN Site-to-Site on Edgerouter (Easy Mode)#3 Default Routes and OSPF explanation#1 Basic Network with Static RoutesPolicy-Based Routing Configuration on Edgerouter#10 Basic Device Configuration#0 My Packet Tracer labGetting Started with Virtual MachinesHow to setup VRRP on Edgerouter-XTCP/UDP FundamentalsHow to Set Up Port-forwarding.#2 Adding a VLAN to the networkCisco Packet Tracer OverviewLinus Tech Tips' 10Gb Internet: Explained (Part 2)#8 Email serversFirewall Groups on Edgerouter#14 NTP, Syslog, and TFTPRaspberry Pi First Time SetupUniFi Cloud Controller - Initial Setup#4 Configuring OSPFJust Some Troubleshooting... #networking #TCPIP #routing