Hold Multiple Parts With NO CLAMPS! | Fixture Friday 16 | Pierson Workholding

On this week's Pierson Workholding Fixture Friday, Jay looks at how to hold multiple parts with no clamps at all!
✅ Tired of making 1 part at a time? 👉 https://bit.ly/39HCcPp

With the part we machined in this episode, if you look at it closely, it would require five setups using traditional vise workholding. But in this week's Fixture Friday, we look at how we palletized the second operation to get eight parts per cycle without using a single clamp. Let's get started!

Follow Pierson Workholding!
Website 👉 https://piersonworkholding.com/
Youtube 👉 https://www.youtube.com/c/PiersonWorkholding
Instagram 👉 https://www.instagram.com/pierson_workholding/

---------------------------------------------------------
**Videos We Recommend**

Fixture Friday Series:
THIS is the playlist to watch if you want to learn about designing fixtures.
https://www.youtube.com/watch?v=orh-DzwONb0&list=PL9u0EBXi5guKflPQpip2kfwb5ES0AKEk1

The Move Series:
How we moved into our new shop!
https://www.youtube.com/watch?v=cviA2zD0_Lg&list=PL9u0EBXi5guL3FrqJp8rZcmugmjxGgb16

00:00 Eight parts per cycle no clamps
00:35 Downside of 5-axis machining
02:15 Bolt-through pallet design
07:18 Outro
#FixtureFriday #Workholding #ProPalletSystem

Видео Hold Multiple Parts With NO CLAMPS! | Fixture Friday 16 | Pierson Workholding канала Pierson Workholding