BEARHAWK ~ Riveting the Wing Skins

BEARHAWK - Usually a 2 man job, I was able to contort myself and buck the wing skin rivets myself. I don't recommend anyone doing it this was. Find an experienced rivet bucking helper.

This video series covers my progress building (and eventually flying) the Bearhawk 4 Place. See my "About This Channel" here: https://youtu.be/yVege887kBk

This aircraft is powered by the Lycoming Thunderbolt YIO-540-EXP. https://www.lycoming.com/engines/thunderbolt

Check out more information on all the Bearhawk Models here: https://bearhawkcanada.ca/ & https://bearhawkaircraft.com/

I am logging the details of my build project here: https://bearhawk4place.blogspot.com/

Instagram: @bearhawklife/

FaceBook: @bearhawklife

Music for my videos by Epidemic Sound: https://www.epidemicsound.com/referral/ewzdaj/

BEARHAWK LIFE DISCLAIMER:
I am a 900+ hour pilot with various ratings including instrument, commercial, multi-engine instrument, CFI, CFII. Those ratings were obtained YEARS ago and do not suggest that I am an expert today. The purpose of these videos is to 1) share my experience building an experimental amateur built aircraft, 2) promote the most underrated, under-promoted Bearhawk back country utility taildragger aircraft in the world. Recording the building and flying help me with self analysis for my own personal improvement. Nothing in these videos should be taken as absolute fact and are not intended to replace professional guidance from a A&P, IA or a CFI... Feedback is invited; however please keep it positive.

Rob Caldwell

Видео BEARHAWK ~ Riveting the Wing Skins канала Bearhawk Life