Foil Board Twin Track Box Install How To
In this video we'll show you how to install a twin track foil board box cassette.
Installing a foil board twin track box into a board entails:
1. Route an a recess into the foil board to install the foil box into.
2. Glue the twin track foil box in place with an epoxy putty made from 3M glass Bubbles and Cabosil thickener
3. Sand the squeeze out down from around the perimeter of the foil box and sand the foil box to match the bottom contours of the board (if necessary)
4. Cap over the foil box with 3 layers of 6oz fiberglass fabric
5. Sand fiberglass cap smooth
6. Paint
7. Mount up the hydrofoil and go have fun!
Видео Foil Board Twin Track Box Install How To канала Fiberglass Supply
Installing a foil board twin track box into a board entails:
1. Route an a recess into the foil board to install the foil box into.
2. Glue the twin track foil box in place with an epoxy putty made from 3M glass Bubbles and Cabosil thickener
3. Sand the squeeze out down from around the perimeter of the foil box and sand the foil box to match the bottom contours of the board (if necessary)
4. Cap over the foil box with 3 layers of 6oz fiberglass fabric
5. Sand fiberglass cap smooth
6. Paint
7. Mount up the hydrofoil and go have fun!
Видео Foil Board Twin Track Box Install How To канала Fiberglass Supply
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Build a Foilboard (The Ultimate Guide Video)](https://i.ytimg.com/vi/T9qoJTRkm1I/default.jpg)
![Foil Strongbox installation video](https://i.ytimg.com/vi/1pIipnNehic/default.jpg)
![FoilMount 3.0 Carbon Installation](https://i.ytimg.com/vi/0pcRentqHV4/default.jpg)
![RIDE ENGINE Hydrofoil Board Shaper Notes | Escape Pod by Coleman Buckley](https://i.ytimg.com/vi/WWauxGmK8T8/default.jpg)
![How to Install a Longboard or SUP Fin Box: Fiberglass Patch Method](https://i.ytimg.com/vi/3_OQnKJ8bac/default.jpg)
![Surfboard Glassing Time-Lapse | Start to Finish](https://i.ytimg.com/vi/iR2HFKMUgsQ/default.jpg)
![How we made a Deep Tuttle Foil Box](https://i.ytimg.com/vi/rpfZXUwUSpY/default.jpg)
![Installing a King-Tut foil fin box into a 2005 159L Starboard formula board](https://i.ytimg.com/vi/eiiu2sYPXu4/default.jpg)
![LXT´s DIY Channel 5: Windsurfboard 2 Windfoil Mod](https://i.ytimg.com/vi/mAgj92hCS7U/default.jpg)
![DIY Windsurfboard to windfoilboard !!! (wider and new footstrap position)](https://i.ytimg.com/vi/B_ozjz8cBZ0/default.jpg)
![How to: Rail Ding Repair on Painted Epoxy Surfboard or SUP](https://i.ytimg.com/vi/3gjJV1IRjTU/default.jpg)
![DIY SUP Foil Track Install (Ride Engine Track, Foilmount)](https://i.ytimg.com/vi/21_m2aPQaFU/default.jpg)
![Routing FCS 2 Fin boxes : Installation](https://i.ytimg.com/vi/JGtvvpZ37Zg/default.jpg)
![5 common beginner mistakes | WING FOIL](https://i.ytimg.com/vi/EuCoPsuEwZE/default.jpg)
![Wizardhat Universal Hydrofoil Hardware](https://i.ytimg.com/vi/ESFpLPpEz9w/default.jpg)
![Efoil jet construction](https://i.ytimg.com/vi/LQfHr5UsS9g/default.jpg)
![How to make a foil front wing - Part 1](https://i.ytimg.com/vi/YXKCl0mhjIg/default.jpg)
![Starboard Formula - Deep tuttle FOIL BOX - installing](https://i.ytimg.com/vi/Bb83FEl8i70/default.jpg)
![Kite Hydro-Foiling Tutorial (bodydrag, taxi, microflights, long flights, gear, how to kite foil etc)](https://i.ytimg.com/vi/0yiXgIaJIPg/default.jpg)
![Futures one shot install kit : Routing & Installing fin boxes with resin](https://i.ytimg.com/vi/PeacX9SBMN8/default.jpg)