How To Fabricate a Custom Firewall Using a Motorized Bead Roller (Model A Roadster Build Part 4)
On this episode of Make It Kustom, I'm back on the 1931 Model A Roadster building a custom bead rolled firewall. I use TIG welding as well as BUTT welding to install the panel. Hammers and dollies are used to control distortion before, during and after welding.
https://www.japhandskustoms.com/shop
https://www.instagram.com/japhands_kustoms/
#MakeItKustom #japhandskustoms #kustom
Видео How To Fabricate a Custom Firewall Using a Motorized Bead Roller (Model A Roadster Build Part 4) канала Make It Kustom
https://www.japhandskustoms.com/shop
https://www.instagram.com/japhands_kustoms/
#MakeItKustom #japhandskustoms #kustom
Видео How To Fabricate a Custom Firewall Using a Motorized Bead Roller (Model A Roadster Build Part 4) канала Make It Kustom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Metal Shaping Techniques : How To Fabricate a Wire Form/Buck
HOW TO Pre Stretch a BEAD ROLL To Prevent Warping! CUSTOM Tear Drop Trailer Rear Hatch (Galley Door)
Bead rolling: Tips and Tricks
Bead Rolling Sheet Metal Floor Pans (Model A Hot Rod Build Part 3)
Metal Shaping Tools!! SHAPE-O-MATIC Power Hammer (Helve Hammer) | FULL Demonstration & Overview
How To Bead Roll 2 STYLES of Door Panels!! Quilted Diamonds & Scales!!
Metal Shaping Using These 3 TOOLS: Power Hammer, Planishing Hammer & English Wheel!!
How To Make and Install Custom Engine Mounts (Model A Hot Rod Build Part 1)
How to Butt Weld Sheet Metal Patch Panels - TIG Welding Tips & Tricks!!
How To Spot Weld in Bead Rolled Floor Pans | Seat Frame Build (1931 Model A Roadster)
2 EASY Ways To Remove Broken/Seized Bolts with A MIG + TIG Welder!! | Fabrication Tips & Tricks
How I Built My Beadroller From Scratch On A Budget!! You Can Do It Too!!
MIG Welding Basics For BEGINNERS!! How To Set Up Your Welder + Tips, Tricks & Techniques!!
How To Use a Hammer & Dolly to Smooth DENTS in Sheet Metal!! | Sheet Metal Repair Techniques PART 1
Finally Found My DREAM CAR!!! Picking Up the 1939 LINCOLN ZEPHYR!! (SUPER RARE)
How To Make a Tucking Fork to Shrink Metal + Demonstration with Simple Tools!!!
1971 GMC Jimmy - Custom Console Build FROM SCRATCH!! Step by Step Process
Metal Shaping MODEL A Rear Panel FROM SCRATCH with English Wheel, Bead Roller & Shrinker Stretcher
Bead Rolling Sheet Metal Floor Pans {MK1 Caddy Rear Bed}