Загрузка...

Sliding The Soldering Iron Back & Forth To The Sides After Putting Some Flux And Adding More Solder

Sliding The Soldering Iron Back & Forth To The Sides After Putting Some Flux And Adding More Solder On This Connector
#electronicstechnician #solder #motherboardrepair #flux #SolderingIron #motherboardrepair #automobile #solderingtool #electronicstechnician #repair #solderingequipment #smartphone #solderingiron #solder #arduinoproject

Видео Sliding The Soldering Iron Back & Forth To The Sides After Putting Some Flux And Adding More Solder канала Rework Station
Комментарии отсутствуют
Зарегистрируйтесь или войдите с
Информация о видео
29 декабря 2025 г. 10:06:05
00:00:25
Rework Station
Правообладателям
Жалоба на материал Недопустимый материал Нарушение авторских прав
Комментарии
Поделиться
Другие видео канала

Something Is Up With One Of The Leads So Getting The Wire To Desolder The Entire USB Port#motherboarSomething Is Up With One Of The Leads So Getting The Wire To Desolder The Entire USB Port#motherboar

Soldering Iron Blade Tip In Between The Leads Of This Connector While Adding More Solder For DesoldSoldering Iron Blade Tip In Between The Leads Of This Connector While Adding More Solder For Desold

All Four Leads Under The Soldering Iron Tip While Adding More Solder After The Liquid Flux#motherAll Four Leads Under The Soldering Iron Tip While Adding More Solder After The Liquid Flux#mother

A Couple Of Taps On One Side Then Got The Rest With The First Try. Just Needed To Add Some FluxA Couple Of Taps On One Side Then Got The Rest With The First Try. Just Needed To Add Some Flux

Comparing The MOSFET With Replacement Component To Be Soldered On The Board#ElectronicsTechnicianComparing The MOSFET With Replacement Component To Be Soldered On The Board#ElectronicsTechnician

63 Sn tin wire for best results #motherboardrepair #electronicstechnician #automobile #solderingiron63 Sn tin wire for best results #motherboardrepair #electronicstechnician #automobile #solderingiron

Putting The Soldering Flat Iron Tip Aside#electronicstechnician #solderingiron #solderingstationPutting The Soldering Flat Iron Tip Aside#electronicstechnician #solderingiron #solderingstation

Trying A Different Suction Pickup Pen For SMD Components On The Rework Station #flux #reworkstationTrying A Different Suction Pickup Pen For SMD Components On The Rework Station #flux #reworkstation

Adding Some Flux First Then Get Some Solder On The Soldering Iron And Ready To Desolder It#solderingAdding Some Flux First Then Get Some Solder On The Soldering Iron And Ready To Desolder It#soldering

Just A Soldering Iron, Tweezers And Some Flux To Desolder This#flux #motherboardrepairJust A Soldering Iron, Tweezers And Some Flux To Desolder This#flux #motherboardrepair

Replacing The Flex Cable With The Connector Using More Solder And Soldering Iron Flat Tip#motherboarReplacing The Flex Cable With The Connector Using More Solder And Soldering Iron Flat Tip#motherboar

Re-Used The Solder Wick By Adding Some Flux And More Solder To Desolder This Port #motherboardrepairRe-Used The Solder Wick By Adding Some Flux And More Solder To Desolder This Port #motherboardrepair

Weekend Flux And Hot Air On The Rework For This Component #motherboardrepair #flux #reworkstationWeekend Flux And Hot Air On The Rework For This Component #motherboardrepair #flux #reworkstation

Soldering Iron Flat Tip On A Re-Used Solder Wick For This Double USB Port#solderingironSoldering Iron Flat Tip On A Re-Used Solder Wick For This Double USB Port#solderingiron

Was Gonna Try To Pick The Connector Up With Some Tweezers But Seems Easier To Handpick It#motherboarWas Gonna Try To Pick The Connector Up With Some Tweezers But Seems Easier To Handpick It#motherboar

After The Soldering Iron On The Wire Then Its Now The Soldering Iron On The Solder Wick Braid ForAfter The Soldering Iron On The Wire Then Its Now The Soldering Iron On The Solder Wick Braid For

Just Not Keeping The Speaker Cable In The Port#solderingiron #solderingstation #electronicstechJust Not Keeping The Speaker Cable In The Port#solderingiron #solderingstation #electronicstech

After The Two Wide Soldering Iron Tips Is A Single Wide Soldering Iron Solder Clearing And SomeAfter The Two Wide Soldering Iron Tips Is A Single Wide Soldering Iron Solder Clearing And Some

Was Going For A Wire Or A Used Solder Wick But Decided To Put On The Rework Station#electronicstechWas Going For A Wire Or A Used Solder Wick But Decided To Put On The Rework Station#electronicstech

A Half Squared Wire Then Some Solder On Each Side Just To Desolder This Off#solderingironA Half Squared Wire Then Some Solder On Each Side Just To Desolder This Off#solderingiron

Яндекс.Метрика
© 2008-2026 «Информационно-развлекательный портал города Верхняя Салда»
salda.ws@mail.ru salda_ws Контакты Карта портала Сообщить об ошибке Соглашения Пользовательское соглашение Соглашение о конфиденциальности Согласие на обработку персональных данных Информация для правообладателей Об использовании Cookies
Все заметки Новая заметка Страницу в заметки
Страницу в закладки Мои закладки
На информационно-развлекательном портале SALDA.WS применяются cookie-файлы. Нажимая кнопку Принять, вы подтверждаете свое согласие на их использование.
О CookiesНапомнить позжеПринять