Making a silicone sock for the Mosquito hotend

The mosquito hotend does not currently have an commercially available sock available, so i will show you how to make your own

STLs for the mold
https://github.com/VoronDesign/Voron-2/tree/103c52f0db0c7cf4b602e8ffb998c625c26cb52a/STLs/Gantry/X%20Carriage/Toolhead/Mosquito%20Hotend%20Sock

The rtv silicone gasket maker i used
https://www.canadiantire.ca/en/pdp/permatex-hi-temp-red-rtv-gasket-maker-0383784p.html#srp
(if you use a different type, make sure to do your research on if it is suitable for this sort of use case)

All things voron
(printer design, discord, etc)
http://vorondesign.com/

Mosquito hotend
https://www.sliceengineering.com/

Видео Making a silicone sock for the Mosquito hotend канала NERO 3D