How to punch small surface area cable lug using SH-70B Hydraulic Puncher

This video shows you how to punch hole on small area cable lug palm by using a metal base plate to support.

The metal base plate 60mm x 45mm with ⌀25mm opening to allow the punch dies to punch hole within the opening. The 60mm width metal base plate can hold down the small area & allow stripper guide on both side of the ram to strip the material after punching. (watch the video)

Using big SH-70B Hydraulic Puncher to punch on small area material.
(in the video, you see small palm 35mm2 cable lug)

==============================
Brand : IZUMI
Model : SH-70B
Throat Depth : 70mm
Output Force : 304 kN at 68.5 Mpa pressure
Size : 360 (H) x 210 (W) x 95 (D) mm
Weight : 14 kg
Punch & Die common size is 10.5, 13.5, 17.5, 20.5 mm diameter (other sizes available upon request)

==============================

#hydraulicpuncher

Видео How to punch small surface area cable lug using SH-70B Hydraulic Puncher канала SuperBen Lim