Installing a Garmin Striker Plus 4cv fish finder into my Ascend H12 Kayak

In this video I Install a new Garmin fish finer into an Ascend H12 kayak using a RAM mount for the display and a Scotty #141 transducer mount.
After building a new battery box for my Kayak in the last video it’s time to install the new fish finder. Throughout this video I use a RAM mount to attach the display unit and a Scotty #141 transducer mount to mount the transducer. I then go into some cable management by adding a bulk head style connector to the power cable to mate with my new battery box and clean everything up with some cable sleeves and F4 tape.

I spent some time explaining each step so if you just want to get the highlight use the time stamps below.

0:14 unboxing the fish finder
1:13 going over the plan
1:46 attaching the RAM mount
3:19 unboxing the Scotty mount
3:55 assembling the Scotty mount
5:46 building the power cable
9:07 everything installed

Follow me on Facebook at https://www.facebook.com/East.0/
And on Instagram at www.instagram.com/est.0outdoors/
#huntsville #fishing #outdoors #adventure #kayak #DIY #kayakmods

Видео Installing a Garmin Striker Plus 4cv fish finder into my Ascend H12 Kayak канала Est. 0