Making a Simple, DIY Rocket Stove w/ a Ryobi Turboboost | Beginner Welding
#DIY #RocketStove #Ryobi #hamandcheese
First off, I know some people are going to take issue with the use of 'simple' and 'diy' in the title of a welding project video, but this IS a simple project and can done with nothing more than an angle grinder with a cutoff wheel and a flap disk, a $100 flux core welder from Harbor Freight (what I used) and a drill. Simple doesn't mean there is no effort involved and DIY doesn't mean you don't need any tools, so get over it and go make something.
I've been looking for simple projects to practice my welding on and recently discovered rocket stoves and decided to put one together. This borrows ideas from several builds I found on YouTube. Overall I'm pretty happy with it but one thing I would change, and might change on this one, is the grate at the end of the feed chute. Mine is currently angled but I think it might work better if the grate were flat. I might cut the chimney right below the feed chute, remove the current grate and make a slightly smaller one so it will fit perpendicular to the chimney and then weld it back together.
Most of it is made from 4x6" steel tube with 4x4" tube for the air inlet and 12x12" 1/4" plate for the base, all of which I picked up from the remnants area of my local metal supplier. If I had purchased full lengths instead of offcuts, I probably would have used 4x4" or 6x6" square tube instead. This was cheaper though. All in I think it was $18 worth of steel.
I used the Ryobi blower as a bellows of sorts to force more air through and get the white oak chunks I was using lit a little quicker. White oak burns well, but sometimes it's a little stubborn getting started.
Videos I got design ideas from:
Justin Voss - https://youtu.be/GMcDekiRKs8
Sean Beardon - https://youtu.be/9-r4VLHQRlM
Martin Calcagno - https://youtu.be/JQ8axWRoEtA
73leo73 - https://youtu.be/rKDuLqLhkzk
Rustoleum High Heat Spray Paint: https://amzn.to/2HcMPI2
Ryobi Workshop Blower:
https://www.homedepot.com/p/RYOBI-18-Volt-ONE-Cordless-Compact-Workshop-Blower-Tool-Only-P755/301289973
Harbor Freight Flux Core Welder: https://www.harborfreight.com/welding/welders/flux-125-welder-63582.html
Camera Gear Links
Canon EOS 80D: https://amzn.to/2GdrnCd
Canon 17-40mm f/4 L: https://amzn.to/2GfdOlY
DJI Mavic 2 Pro: https://amzn.to/2SCWIEf
Find me:
www.sawdustislife.com
www.twitter.com/sawdustislife
www.instagram.com/sawdustislife
Видео Making a Simple, DIY Rocket Stove w/ a Ryobi Turboboost | Beginner Welding канала Bits and Wood
First off, I know some people are going to take issue with the use of 'simple' and 'diy' in the title of a welding project video, but this IS a simple project and can done with nothing more than an angle grinder with a cutoff wheel and a flap disk, a $100 flux core welder from Harbor Freight (what I used) and a drill. Simple doesn't mean there is no effort involved and DIY doesn't mean you don't need any tools, so get over it and go make something.
I've been looking for simple projects to practice my welding on and recently discovered rocket stoves and decided to put one together. This borrows ideas from several builds I found on YouTube. Overall I'm pretty happy with it but one thing I would change, and might change on this one, is the grate at the end of the feed chute. Mine is currently angled but I think it might work better if the grate were flat. I might cut the chimney right below the feed chute, remove the current grate and make a slightly smaller one so it will fit perpendicular to the chimney and then weld it back together.
Most of it is made from 4x6" steel tube with 4x4" tube for the air inlet and 12x12" 1/4" plate for the base, all of which I picked up from the remnants area of my local metal supplier. If I had purchased full lengths instead of offcuts, I probably would have used 4x4" or 6x6" square tube instead. This was cheaper though. All in I think it was $18 worth of steel.
I used the Ryobi blower as a bellows of sorts to force more air through and get the white oak chunks I was using lit a little quicker. White oak burns well, but sometimes it's a little stubborn getting started.
Videos I got design ideas from:
Justin Voss - https://youtu.be/GMcDekiRKs8
Sean Beardon - https://youtu.be/9-r4VLHQRlM
Martin Calcagno - https://youtu.be/JQ8axWRoEtA
73leo73 - https://youtu.be/rKDuLqLhkzk
Rustoleum High Heat Spray Paint: https://amzn.to/2HcMPI2
Ryobi Workshop Blower:
https://www.homedepot.com/p/RYOBI-18-Volt-ONE-Cordless-Compact-Workshop-Blower-Tool-Only-P755/301289973
Harbor Freight Flux Core Welder: https://www.harborfreight.com/welding/welders/flux-125-welder-63582.html
Camera Gear Links
Canon EOS 80D: https://amzn.to/2GdrnCd
Canon 17-40mm f/4 L: https://amzn.to/2GfdOlY
DJI Mavic 2 Pro: https://amzn.to/2SCWIEf
Find me:
www.sawdustislife.com
www.twitter.com/sawdustislife
www.instagram.com/sawdustislife
Видео Making a Simple, DIY Rocket Stove w/ a Ryobi Turboboost | Beginner Welding канала Bits and Wood
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to Sculpt Baby Yoda from The Mandalorian in Sculpey Premo Polymer Clay](https://i.ytimg.com/vi/Jhp6c7ela_w/default.jpg)
![Woodworkers Fighting Cancer 2015 Build - Children's Table and Chairs](https://i.ytimg.com/vi/BH4aAoDT4Sc/default.jpg)
![Making a Welded Horseshoe Pumpkin Decoration for Halloween or Thanksgiving | Beginner Welding](https://i.ytimg.com/vi/CaoWXB8mXBI/default.jpg)
![Unboxing and Assembling a WeldTables.com Certiflat Welding Table](https://i.ytimg.com/vi/LBJXQlFopFc/default.jpg)
![Cheap 💰 Quick & Easy Tip for Straighter Freehand Plasma Cuts!](https://i.ytimg.com/vi/4MNqpcyfLQo/default.jpg)
![The Best Use for Scrap Wood - PART 2 (It involves sausage and cheese!)](https://i.ytimg.com/vi/BoDCTh8ZIDI/default.jpg)
![A Carving Mallet That Won't Roll Off The Bench!](https://i.ytimg.com/vi/jchbJdtBjvw/default.jpg)
![Unboxing and Assembling a Granberg Mk-IV 48" Alaskan Chainsaw Mill](https://i.ytimg.com/vi/JvVWMQuvU4Y/default.jpg)
![Making Hoop-handled Charcuterie Boards](https://i.ytimg.com/vi/b8yKXbM20v4/default.jpg)
![Shop Update - I’m still here! Don’t leave! ;)](https://i.ytimg.com/vi/cW92N8U4fw0/default.jpg)
![Check the tension, DUMMY!!](https://i.ytimg.com/vi/DXOQ4Jm44lQ/default.jpg)
![Saying Goodbye to my Shop... 😭](https://i.ytimg.com/vi/P00C1DiFR6U/default.jpg)
![Why I Like Festool](https://i.ytimg.com/vi/bR5n0sP0FvU/default.jpg)
![Bandsaw VS LAPTOP HARD DRIVE!](https://i.ytimg.com/vi/Y1dGIApEhKE/default.jpg)
![How to Make Teenie Jenga - Teenga?](https://i.ytimg.com/vi/k0QrcEEu1pQ/default.jpg)
![Using Chopstick Scraps & a Solo Stove to Make Hot Chocolate in the Snow!](https://i.ytimg.com/vi/co6gK8A04r0/default.jpg)
![Bandsaw VS RAPTOR!](https://i.ytimg.com/vi/pYX8Ct2Ihm8/default.jpg)
![How to Make an Easy, Not-picture Frame, Picture Frame Thing | Easy DIY Christmas Gifts](https://i.ytimg.com/vi/-VPF3Yy9RNc/default.jpg)
![New Channel Name, Who Dis? | Sawdust Is Life is now Bits and Wood](https://i.ytimg.com/vi/q1knjhTUSB4/default.jpg)
![Turning an Ebony Chess Pawn - Time lapse](https://i.ytimg.com/vi/UWVz-RzgCqc/default.jpg)
![An Early Festool Christmas for Me (RO 90)](https://i.ytimg.com/vi/SdKjr4m6pl4/default.jpg)