How To Build a 4x4 Post or Column that Won't Warp or Bend with Treated Wood
I have 4 main posts outside of my house that hold up an overhang that will be over my deck. 4x4's we're originally used but were horribly warped and twisted. Here I show how to make a 4x4 that won't warp or become as crooked over time by using 2x4's and 1/2" plywood. Of course they may still have some chance of bending slightly but the chance is significantly reduced by using this method.
Thanks for watching!
Blessings,
Ben
Видео How To Build a 4x4 Post or Column that Won't Warp or Bend with Treated Wood канала Benjamin Sahlstrom
Thanks for watching!
Blessings,
Ben
Видео How To Build a 4x4 Post or Column that Won't Warp or Bend with Treated Wood канала Benjamin Sahlstrom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Treat Wood Yourself - How to Treat Wood Against RotⒻ Best Way For Gluing Wood Together To Get Thick Pieces (ep86)3 Tricks To Installing Stronger 4X4 Wood Fence Posts That Last LongerHow to laminate timber properly for use as a bearer or structural beamBuilding Better Beams and Girders | Tips and TricksPorch Post RemodelLets Talk Construction Vol 2- Post Frame ColumnsPost Protector: POST DECAY 101: The Science of Decay, Simplified!How To Set Pressure Treated 4x4 Wood Posts In Concrete (VERY STRONG!)I regret that I did not do it earlier! Very useful thing!Make your own DIY laminated timberCrimping Round Duct With No CrimperDeck Post Cracks❗, should you worry about them❓Half Laps 3 ways: Power, Hand, HybridSetting Roof Trusses | Our Off Grid Homestead Build Ep11 | The ShabinLifeMaking inexpensive beams from framing lumber Pt 1Salvaging 4x4 Beams from a Pallet to Build our Post and Beam CarportAll About Using Pressure Treated Lumber4 TYPES OF WOOD WARP (Where They Come From + How You Can Avoid Them!)