Generative Design Improves Arcimoto's FUV: The Cool Parts Show S3E3
The Fun Utility Vehicle (FUV) from Arcimoto is a car designed with an eye to micromobility and environmental sustainability. The lightweight, low-cost electric car, which came to market last year, was designed for the kinds of typical short trips involving one or two people that match the vast majority of car trips drivers take. What the company did not see is the way its non-traditional car was still subject to the limitations of conventional manufacturing. An encounter between Arcimoto founder Mark Frohnmayer and Avi Reichental, co-founder of ParaMatters, allowed the latter to observe how a variety of the car’s components could be redesigned for lighter weight through the combination of generative design and additive manufacturing.
On this episode, we look at FUV parts before and after their redesign for AM. We show replacement parts made additively that may look crazy, but perform the same function as their conventional counterparts with less weight and perhaps considerably fewer manufacturing steps.
This episode and all of Season 3 brought to you by Carpenter Additive. https://www.carpenteradditive.com/
LEARN MORE ABOUT:
- Our original article on the FUV and the opportunity for AM: https://www.additivemanufacturing.media/articles/generative-design-to-bring-weight-and-cost-savings-for-micromobility-fuv
- A GM bracket redesigned using generative design: https://www.additivemanufacturing.media/articles/why-gms-electric-future-is-also-an-additive-future
- A Ford part now made through 3D printing — The Cool Parts Show S2E1: https://www.additivemanufacturing.media/blog/post/3d-printing-for-production-at-ford-the-cool-parts-show-s2e1
- The link between additive manufacturing, sustainability and the circular economy: https://www.additivemanufacturing.media/additive-manufacturing-will-aid-and-accelerate-the-circular-economy/
HAVE A COOL 3D PRINTED PART TO SHARE?
Tell us about it! Email coolparts@additivemanufacturing.media or comment below.
----------------------------
SHOP THE COOL PARTS SHOW STORE
https://gardner.threadless.com/collections/additive-manufacturing/
FIND US ON SOCIAL MEDIA:
- Twitter https://twitter.com/AddMfgMedia
- Facebook https://www.facebook.com/addmfgmedia/
- Instagram https://www.instagram.com/addmfgmedia/
- LinkedIn https://www.linkedin.com/company/additive-manufacturing-media/
----------------------------
ABOUT ADDITIVE MANUFACTURING MAGAZINE:
Additive Manufacturing is the leading media brand covering 3D printing for industrial applications. In addition to the print magazine, AM includes a website, e-newsletter and annual conference.
Visit Additive Manufacturing online at http://www.additivemanufacturing.media/
Subscribe at https://www.additivemanufacturing.media/sub
#3DPrinting #Manufacturing #Arcimoto #FUV
Видео Generative Design Improves Arcimoto's FUV: The Cool Parts Show S3E3 канала Additive Manufacturing Media
On this episode, we look at FUV parts before and after their redesign for AM. We show replacement parts made additively that may look crazy, but perform the same function as their conventional counterparts with less weight and perhaps considerably fewer manufacturing steps.
This episode and all of Season 3 brought to you by Carpenter Additive. https://www.carpenteradditive.com/
LEARN MORE ABOUT:
- Our original article on the FUV and the opportunity for AM: https://www.additivemanufacturing.media/articles/generative-design-to-bring-weight-and-cost-savings-for-micromobility-fuv
- A GM bracket redesigned using generative design: https://www.additivemanufacturing.media/articles/why-gms-electric-future-is-also-an-additive-future
- A Ford part now made through 3D printing — The Cool Parts Show S2E1: https://www.additivemanufacturing.media/blog/post/3d-printing-for-production-at-ford-the-cool-parts-show-s2e1
- The link between additive manufacturing, sustainability and the circular economy: https://www.additivemanufacturing.media/additive-manufacturing-will-aid-and-accelerate-the-circular-economy/
HAVE A COOL 3D PRINTED PART TO SHARE?
Tell us about it! Email coolparts@additivemanufacturing.media or comment below.
----------------------------
SHOP THE COOL PARTS SHOW STORE
https://gardner.threadless.com/collections/additive-manufacturing/
FIND US ON SOCIAL MEDIA:
- Twitter https://twitter.com/AddMfgMedia
- Facebook https://www.facebook.com/addmfgmedia/
- Instagram https://www.instagram.com/addmfgmedia/
- LinkedIn https://www.linkedin.com/company/additive-manufacturing-media/
----------------------------
ABOUT ADDITIVE MANUFACTURING MAGAZINE:
Additive Manufacturing is the leading media brand covering 3D printing for industrial applications. In addition to the print magazine, AM includes a website, e-newsletter and annual conference.
Visit Additive Manufacturing online at http://www.additivemanufacturing.media/
Subscribe at https://www.additivemanufacturing.media/sub
#3DPrinting #Manufacturing #Arcimoto #FUV
Видео Generative Design Improves Arcimoto's FUV: The Cool Parts Show S3E3 канала Additive Manufacturing Media
Показать
Комментарии отсутствуют
Информация о видео
9 сентября 2020 г. 15:41:28
00:18:24
Другие видео канала
Ford is 3D Printing Automotive Parts for Mass Production: The Cool Parts Show S2E1Generative Design: A revolution in EngineeringArcimoto Company VideoMaking STRONG shelves with Topology Optimization3D Printed Headgear Protects a Cochlear Implant: The Cool Parts Show #31Does the Arcimoto FUV EV Have a Demand Problem?Generative Design Holds the Key to the Future of Cool, Fuel-Efficient Car DesignArcimoto Broke All The Establishment Rules About EVs. Here's Why It's Doing So WellThe incredible inventions of intuitive AI | Maurice ContiMetal 3D Printed Part Should Have Been Flat, Has a Bubble | Why The Failure?Directed Energy Deposition Error Turns Nozzle Into Chess Piece | AM: Why the Failure? Episode 3Autodesk Fusion 360 - Generative DesignTopology Optimization vs. Generative DesignUmea University MA Transportation Design Degree ShowWe Had a Weekend Of Fun With The Arcimoto FUV Electric Trike - And We Loved It!One Man's Plan to Revolutionize Electric Cars and ElectionsJPL Explores a New Approach to Design an Interplanetary Concept Lander3D Printed Bioceramics for Bone Replacement: The Cool Parts Show S3E2What You Did Not Know About | Arcimoto FUV | ▶3Why Dig a Pit in an Additive Manufacturing Facility?