How to Install Wilwood Front Disc Brakes and Dual Bowl Master Cylinder in a 1966 Mustang

After replacing the rear axle seal on my 1966 Mustang, the next item to tackle was the front drum brakes with the new Wilwood disc conversion kit. I also upgraded the Master Cylinder from the stock single both to the mush improved dual bowl.

Brakes: Wilwood, 4-piston, 11.30" discs, fits most 14" wheels and up, part # 140-13476
Master Cylinder: Dual bowl, proportioning valve included (but didn't work, I would recommend a better brand MC and valve system), purchased from CJP
Brake Light Switch: OEM Style, mounts to brake pedal assy, part # STD SLS69, purchased from O'reilly's
Wheel Cylinder: Right side = #17507, Left side = 17508, purchased from NAPA

This video is a How To Install A Wilwood Disc Brakes in a 1966 Mustang

The car is a 1966 Mustang Coupe with a factory V8 and 4 speed transmission.
Shot with GoPro Hero 5, edited on Davinci Resolve 16.
Credit for the music in the video:
::::::::::::::::::::
Music: Whats-the-angle by Shane Ivers - https://www.silvermansound.com
Music: The-88 by Shane Ivers - https://www.silvermansound.com
Music: Say You Will by Shane Ivers - https://www.silvermansound.com
Music: Rocker Chicks by Audionautix is licensed under a Creative Commons Attribution license
Music: Radio Rock by Audionautix is licensed under a Creative Commons Attribution license
(https://creativecommons.org/licenses/...)
Artist: http://audionautix.com/
::::::::::::::::::::

Видео How to Install Wilwood Front Disc Brakes and Dual Bowl Master Cylinder in a 1966 Mustang канала Andy Kruse