When Should I Use Surface On My Bowling Ball
When Should I Use Surface On My Bowling Ball
In this free video, Ronald Hinkland Jr., CEO of Creating The Difference demonstrates each grit of TruCut CtDSanding Pads and how they respond on the lanes.
Looking for more bowling instruction? Check out National Bowling Academy Premium Membership! https://www.nationalbowlingacademy.com/join/
TruCut CtD Sanding Pads
Sanding pads are a required accessory to be competitive in bowling. They come in different grits ranging from 500 grit – 5000 grit. 500 Grit will take the most surface off a bowling ball, creating an earlier hook on the lane with less backend reaction. 5000 Grit will take the least amount of surface off a bowling ball. It will make the ball hook downlane later, allowing for a bigger backend reaction.
Where to start
If you are bowling a house shot for league, start with the 2000 grit. It’s a good place to start. If you notice the bowling ball is hooking too much, move up to 3000 grit and so on until you find your desired ball reaction. If you notice the bowling ball isn’t hooking enough, move down to 1500 grit and so on until you find your desired ball reaction.
Join the National Bowling Academy community to access a huge library of bowling instruction videos: https://www.nationalbowlingacademy.com/join/.
Check out the breakpoint location downlane and side to side location of each bowling ball. The polished bowling ball hits the arrows at the 09 board and rolls to the 04 board (breakpoint) 40 feet downlane. The 500 grit bowling ball (same bowling ball used for both shots), hit the arrows at the 09 board and the breakpoint is the 08 board five feet shorter, 35 feet downlane.
Clearly, this is not where we want to be for our strike shot. For demonstration purposes, we used these shots to illustrate how each product works on the lane. It’s up to you to experiment with each of the grits and get yourself lined up. The goal is to get your ball to hit the pocket consistently while achieving the three phases of ball motion.
Видео When Should I Use Surface On My Bowling Ball канала National Bowling Academy
In this free video, Ronald Hinkland Jr., CEO of Creating The Difference demonstrates each grit of TruCut CtDSanding Pads and how they respond on the lanes.
Looking for more bowling instruction? Check out National Bowling Academy Premium Membership! https://www.nationalbowlingacademy.com/join/
TruCut CtD Sanding Pads
Sanding pads are a required accessory to be competitive in bowling. They come in different grits ranging from 500 grit – 5000 grit. 500 Grit will take the most surface off a bowling ball, creating an earlier hook on the lane with less backend reaction. 5000 Grit will take the least amount of surface off a bowling ball. It will make the ball hook downlane later, allowing for a bigger backend reaction.
Where to start
If you are bowling a house shot for league, start with the 2000 grit. It’s a good place to start. If you notice the bowling ball is hooking too much, move up to 3000 grit and so on until you find your desired ball reaction. If you notice the bowling ball isn’t hooking enough, move down to 1500 grit and so on until you find your desired ball reaction.
Join the National Bowling Academy community to access a huge library of bowling instruction videos: https://www.nationalbowlingacademy.com/join/.
Check out the breakpoint location downlane and side to side location of each bowling ball. The polished bowling ball hits the arrows at the 09 board and rolls to the 04 board (breakpoint) 40 feet downlane. The 500 grit bowling ball (same bowling ball used for both shots), hit the arrows at the 09 board and the breakpoint is the 08 board five feet shorter, 35 feet downlane.
Clearly, this is not where we want to be for our strike shot. For demonstration purposes, we used these shots to illustrate how each product works on the lane. It’s up to you to experiment with each of the grits and get yourself lined up. The goal is to get your ball to hit the pocket consistently while achieving the three phases of ball motion.
Видео When Should I Use Surface On My Bowling Ball канала National Bowling Academy
Показать
Комментарии отсутствуют
Информация о видео
30 января 2021 г. 3:14:12
00:06:35
Другие видео канала
The Slider Bridge ExerciseStanding I-Y-T Exercise with DumbbellsLeg Pull with a PhysioballBowling Advice: Food for Thought | USBC Bowling AcademyQuick Tip: When to Replace Tape and Finger InsertsKey Factors for Proper Bowling Ball Grip PressureHow to Bowl: Washouts | USBC Bowling AcademyThe Return of the PWBAHow to Adjust a Bowling Ball’s SurfaceComplete Core Workout: Superman ExercisePreparation for the PWBA Minnesota OpenResurfacing at the Pro ShopBowling Fundamentals: The Importance of the Pre-Shot Routine | USBC Bowling AcademyHip Flexor Stretch: Alleviating Tightness in Your Calves and HipsThe “IZE” Have ItTips for Proper Bowling SafetyImprove Your Grip with RosinBowlers and Bowling CoachesIncrease Your RevsQuick Tip: Non-Bowling Arm Do’s and Don’tsTips on Bowling Timing