GUIDE: Mazdaspeed 3 Pulsar GTX 3076R // Everything You Need To Run GTX 3076R Turbo!

Super stoked to be working with Pulsar and putting their turbo to the test! Stay tuned for Dyno Day when we make some JAM with some Freeksauce!

Coolant Feed:
6 AN Coolant Line Kit: https://ebay.to/2x0APbj
1/8" Male NPT to 1/4" Female NPT: https://amzn.to/2RnX1Dc
1/4" Male NPT to 1/2" ID Hose: https://amzn.to/2RmCrmv
6AN Female to 6AN Female 90º Swivel: https://amzn.to/2JMboN8
6AN Male to 6An Female 90º Brick: https://amzn.to/3c1ll5s

Coolant Drain:
6AN to 6AN Female Coupler: https://amzn.to/39Y35J7

Oil Feed:
All Star Performance Line: https://www.summitracing.com/parts/aaf-all46402-48
4AN Russell AN to Metric Adapter Fitting: https://www.summitracing.com/parts/rus-670440

Heater Core Hose:
***I meant to say you need 1/2" hose adapter not 5/16"*** so you need THIS tee fitting: https://amzn.to/2JKvQ1b
My Gen 2 needed 3/4" Hose at the Oil Cooler, so I purchased this adapter: https://amzn.to/2xaa0Bi

You'll also want to make sure you have a 3.5 bar MAP sensor for when you push for higher boost. 3.5 bar MAP sensors will give you accurate readings of boost up to 35PSI. If you wanted some buffer, get a 4.5 bar map sensor, those will read up to 48PSI.

Thanks for watching! Hope this video helps someone who wants to throw this turbo on their Mazdaspeed!

Purchase this turbo HERE: https://www.pulsarturbo.com/product/pulsar-turbo-gtx3076r-gen2-turbocharger-introduce-special/

Видео GUIDE: Mazdaspeed 3 Pulsar GTX 3076R // Everything You Need To Run GTX 3076R Turbo! канала Tom Canino