Building a Homemade Backyard Climbing Wall (from Start to Finish)

This is a climbing/bouldering wall that I built over the summer when many climbing centres were closed during lockdown :( It's perhaps a bit more complicated than necessary for a home climbing wall, but I had plenty of time on my hands sooooo

CONSTRUCTION:
The frame was welded together from 1 inch square steel box section (about 100m was used). This was then covered with ~18 square meters of 18mm thick plywood. I used 12mm thick plywood for the roof supported by 100 x 47mm wooden beams. The roof was covered with 2 layers of felt to make it waterproof (I also added a gutter on the back). The whole wall was painted with several layers of weather proof paint to ensure it lasts a long time in the ~changeable~ British weather.

LINKS TO MATERIALS:
Steel: https://www.metals4u.co.uk/materials/mild-steel/mild-steel-box-section/2382-p
Plywood: https://www.clarkesofwalsham.co.uk/18mm-grade-a-hardwood-plywood-q-mark-sheet.html
T Nuts: https://www.fastco.co.uk/m10-zinc-plated-4-prong-tee-nut-pack-of-100.html
Wood to Metal Screws: https://www.fastco.co.uk/catalog/product/view/id/3285/s/5-5-x-38mm-countersunk-winged-wood-to-light-section-steel-self-drilling-screw-zinc-plated-pack-of-100/category/383/
Climbing Holds: https://www.holdz.co.uk/

MUSIC:
"Rising Tide" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/

"Almost Bliss" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/

"Guts and Bourbon" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/

Видео Building a Homemade Backyard Climbing Wall (from Start to Finish) канала Design/Forge