Upgrades and Repairs on a G0765 7x14 Mini Lathe!

PATREON http://bit.ly/28X4419
SUBSCRIBE http://bit.ly/1OAKcuw
INSTAGRAM http://bit.ly/1NLu9zv
FACEBOOK http://bit.ly/1YDV3d5
TWITTER http://bit.ly/1ToGKYm

This is a longer video of my experiences completely disassembling my Grizzly 7x14 Mini Lathe to replace the motor pulley, as well as upgrade the plastic gears inside the headstock to Steel, and change out the Spindle's bearings from Ball Bearings to Tapered Roller Bearings. I also took the opportunity to give everything a thorough cleaning and make sure all of my gibs and ways were in good adjustment.

This project was seemingly daunting, but it went smoother and quicker than I even thought and the end result is well worth the money and effort.

I did use this as a general guideline as well as spindle pulling ideas:
http://www.arceurotrade.co.uk/projects/C3_BC/pages/index.html

This is also a very helpful article for removing the spindle from the headstock:
http://www.mini-lathe.com/Mini_lathe/Tuning/headstock/Headstock.htm

These are the parts I obtained from LittleMachineShop.com:
Tapered Roller Bearings http://littlemachineshop.com/products/product_view.php?ProductID=2822&category=5
Replacement Motor Pulley
http://littlemachineshop.com/products/product_view.php?ProductID=1205&category=5
Replacement Spindle Gears (Steel)
http://littlemachineshop.com/products/product_view.php?ProductID=3451&category=5
http://littlemachineshop.com/products/product_view.php?ProductID=3453&category=5

Видео Upgrades and Repairs on a G0765 7x14 Mini Lathe! канала Practical Renaissance