Compliant Overrunning Clutch - 3D printed
Thingiverse Download: https://www.thingiverse.com/thing:3007265
Overrunning clutches, or freewheel clutches, are used in applications which require torque to be transmitted in only one direction. These clutches have traditionally been used in applications such as vehicle transmissions, engine starters, agricultural equipment, helicopters, and bicycles.There are several variations of over-running clutches, but the four main types include the sprag clutch, the roller or ball clutch, the spring clutch, and the ratchet and pawl clutch. This design most resembles the ratchet and pawl clutch, and was produced by the Compliant Mechanisms Research Group at Brigham Young University, under the direction of Dr. Larry Howell.
https://www.compliantmechanisms.byu.edu/
This overrunning clutch can be 3D printed or milled.
Advantages of using a compliant overrunning clutch:
-lower part count than alternative designs
-easy assembly and maintenance
-reduced part wear
-low cost
-simplicity
-less lubrication required
Disadvantages:
-difficult to manufacture due to very thin segments
-requires non-linear analysis methods
-noisy (when clutch teeth are passively rotating past compliant part)
Видео Compliant Overrunning Clutch - 3D printed канала BYU Compliant Mechanisms Research Group
Overrunning clutches, or freewheel clutches, are used in applications which require torque to be transmitted in only one direction. These clutches have traditionally been used in applications such as vehicle transmissions, engine starters, agricultural equipment, helicopters, and bicycles.There are several variations of over-running clutches, but the four main types include the sprag clutch, the roller or ball clutch, the spring clutch, and the ratchet and pawl clutch. This design most resembles the ratchet and pawl clutch, and was produced by the Compliant Mechanisms Research Group at Brigham Young University, under the direction of Dr. Larry Howell.
https://www.compliantmechanisms.byu.edu/
This overrunning clutch can be 3D printed or milled.
Advantages of using a compliant overrunning clutch:
-lower part count than alternative designs
-easy assembly and maintenance
-reduced part wear
-low cost
-simplicity
-less lubrication required
Disadvantages:
-difficult to manufacture due to very thin segments
-requires non-linear analysis methods
-noisy (when clutch teeth are passively rotating past compliant part)
Видео Compliant Overrunning Clutch - 3D printed канала BYU Compliant Mechanisms Research Group
Показать
Комментарии отсутствуют
Информация о видео
21 ноября 2018 г. 0:39:58
00:00:10
Другие видео канала
Compliant Harmonic Drive (3D Printed)COMPLIANT MECHANISMS COMPILATIONCompliant Mechanism Truck, V3.New devices morph and transform - like Iron Man's suitHome Shop made XY Flexture! Designed with Fusion 360Compliant Mechanisms that Roll Like GEARS!?! -- #VeritasiumContest2016 Overrunning clutchCurved-Folding-Inspired Deployable MechanismsCan you 3D Print a One Way Bearing? Roller Clutch Design3D Printed Ortho-Planar Spring3D printed origami inspired forcepsLEGO Overrunning ClutchJointless Iris mechanism, compliant designWoops!! Excavator had a bad day!!A Computational Design Tool for Compliant MechanismsTriple crossed flexure pivot (TRIVOT) compliant mechanism3D Printed Manual TransmissionCool Prints // 3D Printed Compliant Mechanisms3D Printed Vectoring Mechanism