86-93 Mustang J&L Oil Separator - modifications for use with Maximum Motorsports Strut Tower Brace
J&L oil separator kit p/n 3045P
Slight revision to install directions based on working around a Maximum Motorsports Strut Tower Brace
Hole needs to be drilled to 7/16"
Depending on A/C hose configuration. Some modifications need to be made to the bracket for clearance. The MM strut tower brace's gusset lifts the mounting location of the oil separator bracket higher than without the brace, so this is why some modification to the bend of the bracket may be needed.
Also, depending on how bracket is modified, it may interfere slightly with throttle cable bracket.
Видео 86-93 Mustang J&L Oil Separator - modifications for use with Maximum Motorsports Strut Tower Brace канала Mustang5L5
Slight revision to install directions based on working around a Maximum Motorsports Strut Tower Brace
Hole needs to be drilled to 7/16"
Depending on A/C hose configuration. Some modifications need to be made to the bracket for clearance. The MM strut tower brace's gusset lifts the mounting location of the oil separator bracket higher than without the brace, so this is why some modification to the bend of the bracket may be needed.
Also, depending on how bracket is modified, it may interfere slightly with throttle cable bracket.
Видео 86-93 Mustang J&L Oil Separator - modifications for use with Maximum Motorsports Strut Tower Brace канала Mustang5L5
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Mustang Remote mount power steering reservoir - Chase Bays PS fluid ReservoirNHMS Porsche 911 GT3 Short ClipJust picked up a bone stock 2000 GT convertible for $1K!1988 Mustang engine rebuild updateWhat's coming up for the '88 Mustang in 20241988 Mustang Engine Bay Restoration Overview1988 Mustang walk-aroundFox/SN95 Mustang Spare tire option for larger brakesFoxbody disk brake offset brackets. Changing your rear axle offset using relocation brackets.1988 Mustang update - hydroboost hoses and remote master cylinder installedShelby GT500 - New Hampshire Motor Speedway Xtreme XperienceFoxbody cruise control testing using Rotunda 007-00013 tester1988 Mustang engine restoration - update1988 Mustang LX 5.0 Walk Around99-04 Mustang PATS Key Programming using ForScan79-04 Mustang Headrest Removal1988 Mustang LX project updateFoxbody Mustang Hood Struts - MRT vs Redline tuningCruising in my '88 Mustang LXShelby GT500 @NHMotorSpeedway - Xtreme Xperience June 4 2022