Make Easy Chimney Support Mount for $12 + How To Install It*VERY EASY EP 6 of 7

I'll show how I made a chimney support bracket for 10% of what it would cost if purchasing new. My design is much stronger. I'll also install it on my new chimney.
I included a list of parts needed as shown in this tutorial, See below.

Previous video of the chimney installation https://www.youtube.com/watch?v=6eYEk2AbDjQ
Here is the next video firewood storage https://www.youtube.com/watch?v=LF8DKKk5e40

Here is a previous video of a patio hearth I installed, in this video you will see this style chimney support installed only this time its mounted to the facia board of the shop. My point is this style of support is very versatile & can be useful beyond thew norm .. https://www.youtube.com/watch?v=HQo02...

First id like to mention the chimney here is a 6". For that I used a 36" long strap to wrap the chimney. An 8" chimney pipe may require a slightly longer strap. In the video I added an additional 24" strap for extra strength however I do not think this is necessary & suggest skipping that. I used all galvanized parts with the exception of a few zinc screws. It may be ideal to use galvanized lag bolts to secure the angle bracket into the roof. Hope this info was helpful. It was rather difficult to record when up on the roof top, it was windy. The chimney was installed the day before I installed the chimney support.
Parts list:
1.) 36" long metal strap http://www.google.com/url?sa=t&rct=j&...

1.) 10' X 1/2" conduit pipe... To be cut into two equal lengths
1.) 10" X 3/4 conduit pipe... to also be cut into two equal lengths.
2.) 2.5" angle pieces that mount to the roof http://www.homedepot.com/p/Simpson-St...

2.) 1" long bolts & see below &
4.)nuts that secure to the strap thats mounted to the chimney
1.) 2" bolt & nut that fasten the strap together on the chimney
1.) tube of silicone or roofing tar or?
8.) 1 1/4 screws or lag bolts to secure the angled pieces to the roof.
2.) additional nuts & bolts 1" to fasten the lower portion of the conduit piece to the bracket
4.) 1/2" self tapping screws
music

Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/

Видео Make Easy Chimney Support Mount for $12 + How To Install It*VERY EASY EP 6 of 7 канала Mike's DIY Projects & More