Fusion 360 - Rib Pattern
Create a series of ribs that straddles a cylindrical face, without the use of overlapping extrudes or deleting faces. How can we ensure that the patterned ribs fully extend up to the cylinder? Can this be maintained even when the cylinder changes in diameter?
If you have found this video useful and would like to support me, you can buy me a coffee at
https://www.buymeacoffee.com/fusion360school
or you can also support me on Patreon at
https://www.patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360ribpattern
0:00 Intro
0:14 Creating the seed rib
2:10 Rectangular Pattern
3:48 Comparison with overlapping extrude
Видео Fusion 360 - Rib Pattern канала Fusion 360 School
If you have found this video useful and would like to support me, you can buy me a coffee at
https://www.buymeacoffee.com/fusion360school
or you can also support me on Patreon at
https://www.patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360ribpattern
0:00 Intro
0:14 Creating the seed rib
2:10 Rectangular Pattern
3:48 Comparison with overlapping extrude
Видео Fusion 360 - Rib Pattern канала Fusion 360 School
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Fusion 360 - Sweep VS LoftFusion 360 - Web VS Rib5 Techniques avancées avec l'extrusion [FUSION 360]Creating Shop Drawings in Fusion 360 | TutorialFusion 360 for Beginners 2021Fusion 360 - знакомство и первая детальFusion 360 - Case Study 7Fusion 360 Mistakes I Make Sketching (10 Things To Avoid)Fusion 360 | Overmold ModelingPatterns and Knurling for 3D Printing — Fusion 360 — IntermediateFusion 360 | Ruled Surface & TrimFusion 360 - Case Study 10Fusion 360 - Master Model WorkflowModel a WORKING Spring in Fusion 360! (ADVANCED TIP)Fusion 360 - Emboss (New Command)Fusion 360 | Fix Fillets (Surfacing)Fusion 360 - Demystifying Commands under Project/IncludeFusion 360 - Non-planar BoxFusion 360 - Intersection CurveUsing the LOFT TOOL in Autodesk Fusion 360