Focus ST Eibach Coil Spring Sportline Set Early 2013 Installation
Bill shows you how to install a Set of Eibach Sportline Coil Springs on your 2013 Focus ST Built Before July 8th, 2013.
Purchase Product Here:
https://www.cjponyparts.com/eibach-coil-spring-sportline-set-focus-st-early-2013/p/414035/
Eibach's Sportline Coil Spring Set will equip your 2013 Focus ST Built Before July 8th, 2013 with race car like handling for maximum street performance. With Sportline Coil Springs, you will achieve the lowest possible drop, yet maintaining the exceptional ride quality you expect from Eibach. You will be able to stop quicker, corner faster, gain better MPG, and dramatically reduce squat during acceleration.
For installation, you'll first access and loosen the strut tower. Then, remove the wheel and disconnect and remove the strut, following Bill's instructions in the install video. After this, you'll disassemble the strut, removing the original spring and spring dust boots. Then, install the new Eibach spring and dust boot on the spring, along with the bump stops included in the set.
Return the strut to your Focus and reinstall all bolts and brackets, reconnect the sway bar and ABS sensor, and then repeat this process on the other side. Resecure your wheels and reassemble your strut tower and cowl.
Next, you'll work on your rear springs, which are a lot less involved. Remove the bolt pointed out by Bill, which holds the perch in place, allowing you to access the rear spring. Remove the spring and bump stop, and then secure the new bump stop and new Eibach spring (While we have had no problem with the numb stop mounted as shown, Eibach recommends installing the numb stop on the shock). Next, return the perch and bolt and then complete this process on the other side. Total installation takes around three hours.
Check out more Focus ST Lowering Springs from CJ's here:
http://www.cjponyparts.com/focus-st-lowering-springs/c/4470/
Check out more Eibach parts from CJ's here:
http://www.cjponyparts.com/eibach/c/8_1001_51/
Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_center?add_user=cjponyparts
Видео Focus ST Eibach Coil Spring Sportline Set Early 2013 Installation канала CJ Pony Parts
Purchase Product Here:
https://www.cjponyparts.com/eibach-coil-spring-sportline-set-focus-st-early-2013/p/414035/
Eibach's Sportline Coil Spring Set will equip your 2013 Focus ST Built Before July 8th, 2013 with race car like handling for maximum street performance. With Sportline Coil Springs, you will achieve the lowest possible drop, yet maintaining the exceptional ride quality you expect from Eibach. You will be able to stop quicker, corner faster, gain better MPG, and dramatically reduce squat during acceleration.
For installation, you'll first access and loosen the strut tower. Then, remove the wheel and disconnect and remove the strut, following Bill's instructions in the install video. After this, you'll disassemble the strut, removing the original spring and spring dust boots. Then, install the new Eibach spring and dust boot on the spring, along with the bump stops included in the set.
Return the strut to your Focus and reinstall all bolts and brackets, reconnect the sway bar and ABS sensor, and then repeat this process on the other side. Resecure your wheels and reassemble your strut tower and cowl.
Next, you'll work on your rear springs, which are a lot less involved. Remove the bolt pointed out by Bill, which holds the perch in place, allowing you to access the rear spring. Remove the spring and bump stop, and then secure the new bump stop and new Eibach spring (While we have had no problem with the numb stop mounted as shown, Eibach recommends installing the numb stop on the shock). Next, return the perch and bolt and then complete this process on the other side. Total installation takes around three hours.
Check out more Focus ST Lowering Springs from CJ's here:
http://www.cjponyparts.com/focus-st-lowering-springs/c/4470/
Check out more Eibach parts from CJ's here:
http://www.cjponyparts.com/eibach/c/8_1001_51/
Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_center?add_user=cjponyparts
Видео Focus ST Eibach Coil Spring Sportline Set Early 2013 Installation канала CJ Pony Parts
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
We Lowered Her Focus ST! // Eibach Pro KitFocus ST Suspensions Coilover Kit ST-X 2013-2018 InstallationFocus ST/Focus RS Rally Armor Mud Flap Set 2013-2018 InstallationBuilding a 400+ WHP Focus ST in 10 Minutes! | ROBERT WILLIAMSMUST HAVE Modifications for your Focus ST | Focus ST Full Mods List *to date* |Early 2013 Focus ST Handles Like It's On Rails After Steeda Lowering Spring InstallCobb Install How-To: 2013 Ford Focus ST Lowering Springs (9F1760)Focus ST Install: Set of Eibach Pro-Kit Coil SpringsPróbakör - Sportos családi: Ford Focus ST kombi2008-2019 Challenger Eibach Sportline Lowering Springs Review & InstallFocus ST COBB Front Mount Intercooler Kit 2013-2016 Installation2013-2017 Ford Focus ST Ecoboost H&R Sport Springs Install2004-2014 F-150 Front Strut ReplacementFocus ST JLT Performance Oil Separator 3.0 Front Side Clear Anodized Kit 2013-2018 InstallationHow to Lower Your Car - Install Eibach Lowering Springs - Trans Am WS6 Camaro SS Z28HOW TO : Outlander ZG 40mm Lift kitTHE EASIEST * STAY AT HOME * PAINT YOUR BRAKE CALIPERS * BRUSH ON * | MK2 FOCUS ST REFRESHHow to Replace Struts in your Car or TruckHow to Replace Rear Subframe Assembly 00-08 Ford Focus