DIY 3D Printer - Build a CoreXY Printer - LayerFused X301 Preview

Introducing the new DIY 3D Printer the LayerFused X301. This Printer is an open source CoreXY Build that will have a complete series in the coming weeks. You will be able to follow along step by step with our tutorial and learn how to build your own large format CoreXY Printer. If you have wanted to build your own CoreXY DIY 3D Printer this upcoming series will enable you to build your own. This is a big DIY 3D Printer with a 300x300x340 build area on a 328x328 build plate. This large format printer allows you to make some big 3d prints.

Visit the LayerFused store for many X301 Parts and Upgrades
https://shop.layerfused.com/

In this video we cover the overview of the printer and introduce the features and build.

The reference build specifications for the printer are:
Small 440mmx400mm Footprint
CoreXY Motion Control System
Linear Rail Motion for X, Y and Z
Sensorless Homing X/Y
Mechanical Or Optical Homing on Z
300mm x 300mm x 340mm build Volume
0.0125 X/Y Resolution (12.5 micron with 1.8° steppers)
0.000625 Z Resolution (.625 micron with 2mm lead screw and 1.8° steppers)
Huge 400mm x 400mm x 80mm base for electronics enclosure
Open carriage design allowing for virtually any extruder
The open front of the printer provides more space for extruders and design.
Direct Drive Pancake Stepper
BMG Style Geared Extruder
V6 Nozzle
Volcano Heat Block (for higher speed and reliable melt zone)
.4mm hardened volcano nozzle
24v 40w Heater Cartridge
300mm x 300mm build surface Mk2a Bed
Mk2a aluminum bed
Silicone bed mounts
Unobtrusive Lighted Build Plate
Single or Dual power supply option (Run both 12v and 24v)
SKR V1.4 Turbo Mainboard
TMC2225 Stepper Drivers for Z and E
TMC2209 Stepper Drivers for X and Y
Neopixel LEDs for lighted bed.
Heat Bed Mosfet

Please mash that like button if you enjoyed this video and leave your comments below!

Please consider helping support the channel through Patreon or GoFundMe so we can continue to develop new content.
https://www.patreon.com/makersmashup

Follow my Thangs.com profile to find all the models I make!
https://thangs.com/user/Makers%20Mashup/profile
https://www.gofundme.com/MakersMashup

Chat with us and other makers on our Discord: https://discord.gg/ZDKq5N2

Follow us on Twitter: https://twitter.com/MakersMashup
Instagram: https://instagram.com/makers_mashup/
Visit our website www.MakersMashup.com

MakersMashup Uses TubeBuddy as their YouTube assistant! https://www.tubebuddy.com/MakersMashup

Видео DIY 3D Printer - Build a CoreXY Printer - LayerFused X301 Preview канала Makers Mashup