- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
4-Point Saddle Made Easy | 30° Bends for a 3.5” Offset
Need to clear an obstacle with a deep 4-point saddle?
This Short shows how electricians measure and bend a 4-point saddle using 30° bends for a 3.5” offset—clean, accurate, and jobsite-ready.
Perfect for:
• Electrical apprentices
• EMT conduit bending
• Fire alarm and low-voltage work
• Learning saddle bends the right way
Clean measurements = clean bends = fewer re-bends.
👉 Follow for real electrician jobsite tips.
Видео 4-Point Saddle Made Easy | 30° Bends for a 3.5” Offset канала Bend Boss
This Short shows how electricians measure and bend a 4-point saddle using 30° bends for a 3.5” offset—clean, accurate, and jobsite-ready.
Perfect for:
• Electrical apprentices
• EMT conduit bending
• Fire alarm and low-voltage work
• Learning saddle bends the right way
Clean measurements = clean bends = fewer re-bends.
👉 Follow for real electrician jobsite tips.
Видео 4-Point Saddle Made Easy | 30° Bends for a 3.5” Offset канала Bend Boss
Комментарии отсутствуют
Информация о видео
9 апреля 2025 г. 20:21:30
00:02:26
Другие видео канала
Box Offset Pattern That Lands Clean
How to Layout 3 Parallel 3/4” EMT Back-to-Back 90s
No Bend Is Difficult.
Why Do Your Parallel Kicks Keep Crowding?
Three-Point Saddle for Tight Spaces | Conduit Bending Tip
3/4”Four Point Saddle Bend
3/4" EMT Box Offset Math & Bending (5 Degree Offset Method)#electrician #emtpipe #firealarm
How To Reroute Conduit Runs Using Two 90° Bends & Two 30°Bends Without LB,s ?
Rolling Offset Math Made Simple (3/4” EMT. #electrician # conduit bending
How to Mark EMT for a Rolling Offset #conduit bending # electrician
How to Achieve Equal Spacing Between Conduit Runs All The Way?
Perfect 45°Horizontal to Vertical Conduit Transitions
Stop Creating Pull Points | Smart Conduit Routing for Tight Spaces #industrialelectrician
Fire Alarm Sprinkler Dry System | Wiring Control Modules & Smoke Detectors
Uneven Floor or Did not Bring Level Along?? Use a Perfect 90º Gypsum Board To Verify Your Bends
Why Parallel Path Crowding Always Occur When Bending 90º With Kicks?
How To Master the S-Shape and U-Shape Back to Back Conduit Bends? # Electrician # Fire Alarm.
Basic Math For Parallel 90º Conduits With Matching Fanned Kicks #emtconduit #electrician
Evenly Spaced Parallel Offset Bends #electrician #EMT
Finding Hypotenuse Distance For 16° Kick Bend
Bending to the Correct Degree | 3/4” EMT Rolling Offset #electrician #conduit-bending
