Mini sand rail rear A-arm construction
In this video we show how the rear IRS (independent rear suspension) is designed, build and mounted on the buggy. We started by designing the suspension geometry with the prop shown in the beginning and then cut and welded them up using a jig we created. Once the A-arms were mounted we ended up with about 30 degrees of movement which is plenty for the shocks that we are using. Please consider subscribing and we will see you in the next video!
Feel free to contact us by commenting below or by using the email below:
gobrosgoebel@gmail.com
https://www.instagram.com/wearethegobros/?hl=en
Видео Mini sand rail rear A-arm construction канала GoBros
Feel free to contact us by commenting below or by using the email below:
gobrosgoebel@gmail.com
https://www.instagram.com/wearethegobros/?hl=en
Видео Mini sand rail rear A-arm construction канала GoBros
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Baja Front Suspension Build #6 (Upper Control Arms)Dune buggy build rear suspensionPredator 670 kart gets I.R.S. Part 3Mini Sand Rail Chassis Buildmaking a dune buggy CV rear axle setup part 2How to Build Rear Swing Arm | Off Road Buggy project part 2Sand Rail CoilOver Shocks, basic overviewHomemade 450hp V8 Sand Rail Dune Buggy RestorationOff road shifter go kart crosskartLong Travel IRS on a 50hp 670cc Chinese Buggy (Part 3)The Quarantine rebuild, Coil over Shocks on a VW sand rail5 Link Buggy SandRail SuspensionSuspension Geometry (A Arm for Baja)Episode 1 - Unboxing the East Coast Sand Rail frame.70hp Off-road Crosskart Front Suspension Done! Part 5Hayabusa Sand Rail Part 8 First Dune SeasonBuggy build episode 3! Rear suspension and front shocks.How to build upper control arms for sand rail part 1DIY control armsChain Drive Forward Reverse Gearbox for Motorcyle Engine Powered Buggy