Mikuni BDST 38 Full restoration - Part 2

This is the 2nd part of the restoration of the Mikuni BDST 38mm carburetors from my Yamaha FZR 1000. Pretty much every other Mikuni BDST is the same and the procedure is almost identical.
In this video, I'm not only showing how to put together the carburetors, but also how to synchronize them and how to adjust the pilot screws!
This will result in amazing engine response and fuel economy too! These adjustment methods can be used in other carburetors as well.

Pilot screw settings:
FZR 1000 '87-'89
2 1/2 turns out

FZR 1000 '90 onward
3 turns out

Carburetor synchronizer tool I used:
https://www.ebay.com.au/itm/271706450468

The jetting kit I used from Keyster:
https://www.motorcyclespareswarehouse.com.au/products/ky-0753-carb-repair-kit?_pos=1&_sid=77ff755f8&_ss=r

Parts used from LiteTek :
https://litetek.co/Carb_Kit_Yamaha_FZR1000_89-95.html

Follow me on Instagram:
@chris_sofotasios_

Watch Part 1 here:
https://youtu.be/jiwHfbCTLMc

00:37 Assembling
11:32 Checking the fuel level
13:30 Synchronizing the carburetors
19:15 Adjusting the pilot screws
20:52 All done!

Other videos:
Yamaha FZR1000 Exup engine restoration:
https://www.youtube.com/playlist?list=PLxrvpY1pWFRnuFJoaZANlxMDnDs0kTqg8

Yamaha FZR1000 Exup restoration:
https://www.youtube.com/playlist?list=PLxrvpY1pWFRn2tTkgQY3TmykxsQmDOxdr

Yamaha YZF750R:
https://www.youtube.com/playlist?list=PLxrvpY1pWFRmOUZspxtQezaMk3cRVl6M4

Chevrolet Camaro 3rd Generation:
https://www.youtube.com/playlist?list=PLxrvpY1pWFRkJSmB_wLREccepS07uKVH4

MG Midget MkIII:
https://www.youtube.com/playlist?list=PLxrvpY1pWFRmAynaR5DMmMO5-bmPtox_Z

Technical videos:
https://www.youtube.com/playlist?list=PLxrvpY1pWFRmjVvfXhIM_4w6iOzLZllEy

Видео Mikuni BDST 38 Full restoration - Part 2 канала Chris Sofos