Face mask: from 3D Scan to 3D print

To get a perfect sealing and comfortable face mask, I am 3D scanning the face of my wife and using that surface to design and 3D print a perfect fitting mask. This is my second video about 3D printed face masks for air filtration. The first video about masks for air filtration:
https://youtu.be/fFOc6d4Ry9M
Content:
0:00 - Introduction
2:36 - 3D Scanning with Xbox Kinect
5:36 - Tips for 3D scan with photogrammetry
6:47 - Preparing in Meshmixer
8:04 - Design in Fusion 360
11:47 - Simple design in Fusion 360
12:32 - Slicer and 3D printing
15:25 - Testing

Materials I am using:
- Xbox Kinect + Power adapter for PC
- Printing on Prusa MK3
- Printed with PLA, sealing ring with Orbi-Tech soft PLA
- HEPA filter

Used software:
-Skanect (free version)
-Meshmixer
-Fusion 360
-Prusa Slicer

Links:
My Multicolor in same layer 3D print tutorial:
https://youtu.be/-W-UEwg2j0Q
List of my videos with 3D PRINT tag:
http://www.mytechfun.com/videos/3dprint
Skanect:
https://skanect.occipital.com/
Meshmixer:
http://www.meshmixer.com/
Fusion 360:
https://www.autodesk.com/products/fusion-360/overview
Donation, support my work:
http://www.mytechfun.com/donation

Disclaimer:
None of these models has been approved by any regulatory agency. Use it at your own risk, and only as a last resort, if you do not have any other homologated protection. The recommended measures to protect yourself from infection with the coronavirus COVID-19 are the following:
• Stay home and avoid contact with other people
• Avoid touching your face with your hands
• Wash your hands very often

Видео Face mask: from 3D Scan to 3D print канала My Tech Fun