AutoCAD development of a truncated hexagonal Prism III
This video is the third part of a three-part series addressing a problem involving the development of a truncated hexagonal prism. The truncation plane is perpendicular to the vertical plane and inclined at 30 degrees to the horizontal plane. Two vertical faces of the prism are parallel to the vertical plane. The video covers the drawing of the full surface development of the prism.
Видео AutoCAD development of a truncated hexagonal Prism III канала Dela Dzobo
Видео AutoCAD development of a truncated hexagonal Prism III канала Dela Dzobo
Комментарии отсутствуют
Информация о видео
14 июля 2025 г. 16:00:11
00:21:35
Другие видео канала
Lecture 4 Dimensioning B
Tangent to a circle from a given point
Visualising a Bracket for orthographic projection 1
Orthographic projection tutorial 1
Lecture 4 Dimensioning A
Layers I
Tangent to a circle through a point on the circle's circumference
AutoCAD development of a truncated hexagonal Prism II
visualising a bracket for orthographic projection 2
How to avoid errors in tangency constructions 1
Assembly Drawings 1 recorded
SECTIONED VIEWS
Orthographic projections of a bracket 2b
External tangent to two unequal circles
Tangency problem 1
Lecture 7 Orthographic projections
Internal and external tangent to two circles of the same diameter
Internal tangent to two unequal circles
PARTS NOT SECTIONED
AutoCAD development of a truncated hexagonal Prism I
