Hyper Smoov 🎥 | FPV Drone Cruisestyle

Testing out Newbeedrone's 2306 1750kv Smoov motors and the GoPro Hero 8 Black's Hypersmooth 2.0.
Motors felt super smooth under the goggles and I'm surprised at how well Hypersmooth kept things mostly smooth despite the 20mph winds working against me. Had an unplanned landing at the end there due to running out of juice.
Team Pilot for:
Armattan Quads
HQProp
Newbeedrone
MyFPVStore
Goonskwad
-------------------------------------------------------
All links are up to date (Most are affiliate). Gear listed here can be found in my quads and is the gear I use to have a fun, quality experience.
--5inch Kwad Setup- -
Frame:
-Armattan Badger https://bit.ly/2Ur6fNH
Flight Controller:
-FETtec FC https://bit.ly/2s32upo
ESC:
-FETtec 4in1 ESC https://bit.ly/2FuAOwY
Power Board:
ImpulseRC WOLF PDB https://bit.ly/2GILEBX
Motors:
-Mr. Steele Stout v3 2306 1750kv https://bit.ly/30Mzopw
-Armattan TOA 23061750kv https://bit.ly/34VX3Xf
Props:
-HQProp Ethix S4 5x3.7x3 https://bit.ly/2Lkwmpq
Camera:
-Runcam Swift Mini 2 with 2.5MM lens
Receiver:
-Crossfire Nano https://bit.ly/2Db08Gn
Receiver Antennas:
-Standard https://bit.ly/2t4T3Td
-Immortal T https://bit.ly/2DRakpl
VTX:
-TBS Unify Pro HV https://bit.ly/2DbjZWi
-TBS Unify Evo https://bit.ly/32G0rDY
VTX Antenna:
-TBS Triumph https://bit.ly/2Ttefhp
Battery:
-Thunder Power 6S 1100mah
Battery Straps:
-ETHIX GoPro Strap https://bit.ly/2WzaWHv
--10inch Kwad Setup--
Frame:
-Nasty405 10inch sculptcopter.com
Flight Controller:
-BrainFPV Radix https://bit.ly/2p2wiOf
-Radix PB https://bit.ly/2DftykV
ESC:
-Airbot Wraith Metal V2 66A ESCs w/ 50v 1000uf low ESR caps. https://bit.ly/2HORBi7
Battery:
Pyrodrone Graphene 2200 5S https://bit.ly/2t6lXm5
Motors:
-BrotherHobby Tornado T5 3115 1050kv motors w/ HQ 10x5x3 Props
https://bit.ly/2yaAb7Y
https://bit.ly/310zDy1
VTX:
TBS Unify Pro V3 https://bit.ly/2RzQaUs
Antenna:
-TBS Triumph https://bit.ly/2Ttefhp
RX:
-Crossfire Nano https://bit.ly/2Db08Gn
-w/ SMA pigtail running to a Crossfire tuned TX antenna.
Camera:
-Runcam Eagle Micro https://bit.ly/2S6WTu4
-M8N UBLOX GPS
-3D printed rear dual SMA mount and GPS mount by @danimal_fpv.
--Gear--
Radio:
-Jumper T16 https://bit.ly/2P6FaP9
Long Range:
-TBS Crossfire Micro Module https://bit.ly/2MNDGYl
Goggles:
-FatShark HDO
Goggle Receiver:
-TBS Fusion https://bit.ly/2kAt8Ca
Antennas:
-VAS Ion v2 https://bit.ly/31nuhgc
-VAS Crosshair XTREME (Better than what I use) https://bit.ly/2RDy1oy
Other Gear:
-Gopro Session 5
-GoPro Hero 7 Black
-Ethix Neck Strap:https://bit.ly/2RgmgIp
-Ethix goggle strap: https://bit.ly/2qUrKhf
-Soldering Iron https://bit.ly/2HMuxjR
-Soldering Iron Carry Case: https://bit.ly/2HMBMsh
-BetaFlight Hive Backpack

Видео Hyper Smoov 🎥 | FPV Drone Cruisestyle канала Red5 FPV