DIY Table Saw | Part IV - CrossCut Sled
★ DIY TABLE SAW | PART IV - CROSSCUT SLED ★
In this series I'll show you how to make your own Table Saw, from a cheap saw. The goal is to be able to have a reasonably accurate table saw without "breaking the bank".
This is the fourth and last video of the series and it's about making some small adjustments and the Crosscut Sled.
Links bellow are affiliate links, which means a small commission might be earned.
TOOLS USED:
► Parkside Table Saw or similar
► Ripping Table Saw Blade: https://geni.us/l6kBS8 (Amazon)
► Cordless Drill/Driver: https://geni.us/aeyxYSw (Amazon)
► Disc Sander: https://geni.us/IbY3r (Amazon)
► Sliding Miter Saw: https://geni.us/oEHck24 (Amazon)
► Bandsaw
MATERIALS USED:
► 18mm thick Baltic birch plywood
► 21mm thick melamine Baltic birch plywood
► 8mm stainless steel rod
► T-track: https://geni.us/Phgr (Amazon)
► Stopper for T-track: https://geni.us/ll1Eu0 (Amazon)
► Key-chain ring
► Wood screws
► Wood glue
I hope you like the video and feel free to ask any questions, make comments or suggestions.
Thanks for watching!
FOLLOW ME ON INSTAGRAM: https://www.instagram.com/_dmaker_/
#DMaker #TableSaw #CrossCutSled
Видео DIY Table Saw | Part IV - CrossCut Sled канала DMaker
In this series I'll show you how to make your own Table Saw, from a cheap saw. The goal is to be able to have a reasonably accurate table saw without "breaking the bank".
This is the fourth and last video of the series and it's about making some small adjustments and the Crosscut Sled.
Links bellow are affiliate links, which means a small commission might be earned.
TOOLS USED:
► Parkside Table Saw or similar
► Ripping Table Saw Blade: https://geni.us/l6kBS8 (Amazon)
► Cordless Drill/Driver: https://geni.us/aeyxYSw (Amazon)
► Disc Sander: https://geni.us/IbY3r (Amazon)
► Sliding Miter Saw: https://geni.us/oEHck24 (Amazon)
► Bandsaw
MATERIALS USED:
► 18mm thick Baltic birch plywood
► 21mm thick melamine Baltic birch plywood
► 8mm stainless steel rod
► T-track: https://geni.us/Phgr (Amazon)
► Stopper for T-track: https://geni.us/ll1Eu0 (Amazon)
► Key-chain ring
► Wood screws
► Wood glue
I hope you like the video and feel free to ask any questions, make comments or suggestions.
Thanks for watching!
FOLLOW ME ON INSTAGRAM: https://www.instagram.com/_dmaker_/
#DMaker #TableSaw #CrossCutSled
Видео DIY Table Saw | Part IV - CrossCut Sled канала DMaker
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Adjustable Clamp RackHT#3 | Miter Saw Zero Clearance InsertDIY Make-Up Mirror with LightsOutdoor Pull-up RackHow to Make a Wood Mallet from Scrap WoodHow to Make a Wooden Slat Room DividerDIY Router Table in Homemade TablesawHow to Install a Wood Fence Above a WallHT#2 | How to Calculate StairsDIY Stackable Fruit Crates/Boxes from Old PalletsDIY Table Saw | Part III - Tabletop and FenceHow to Make a Bed HeadboardDIY Table Saw | Part II - Tilting System and CabinetHow to Make a Branding IronDIY Camera Rig for Overhead ShootingDIY Wooden StaircaseDIY Table Saw | Part I - Enclosure and Lifting SystemHow to Make 2 Types of PushsticksDIY Wood Garage ShelvesHT#1 | How to Dismantle a Pallet with Simple Tools