How to Apply Two Coats When Powder Coating - Motorcycle Stunt Cage Powder Coating - Eastwood

In this video Beau Sprays Two Coats of Powder on a Motorcycle Stunt Cage! He Sprays Hotcoat Appliance White powder as a base coat and top coats it with atomic yellow powder!

Start Powder Coating: https://www.eastwood.com/dual-voltage-hotcoat-powder-gun.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2018-04-23&utm_content=Powder%20Coating%20Gun

Buff Wheel : https://www.eastwood.com/eastwood-abrasive-buffing-wheel.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2018-04-23&utm_content=Abrasive%20buff%20wheel

Dual-Voltage HotCoat Powder-Coating Gun gives you the most complete coverage from tight areas to large surfaces.

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical
Versatility with 2 settings
Low 15,000-volt setting
High 25,000-volt setting for multi-coat coverage over larger areas
Increased powder adhesion
Minimal overspray
This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. The new Dual Voltage system gives you the capability to coat small areas using the Low 15kv setting. Or coat large areas using the High voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) and an electric oven or toaster oven.

The Dual Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

Видео How to Apply Two Coats When Powder Coating - Motorcycle Stunt Cage Powder Coating - Eastwood канала Eastwood Company