Large format Tile Installation with H40 Grey Application Video

Highly flexible, multi-purpose, structural adhesive to fix fully vitrified
tiles and natural stone of all types and size.
• For internal and external use, • Long open time, • Shape memory - per India free flowing, • No sag, • Water resistant, • Full coverage, • Sustains heat ageing, • No shrinkage, • High deformation, • Structural adhesion, • Distributes tensile strength, • Increases resistance, • Transfers the forces, • Absorbs dynamic loads
Use:
Uses No Limits:
-- Adhesive and finishing, -- Floors and walls, -- Internal use – external use
-- Overlaying, -- Terraces and balconies, -- Façades, -- Swimming pools and fountains, -- Saunas and spa, -- Domestic applications, -- Industrial applications, -- Commercial applications, -- Street furniture
Materials No Limits:
-- Vitrified tiles, -- Laminated stoneware, -- Low thickness slabs
-- Ceramic tiles, -- Large size, -- Terracotta, -- Marble and natural stone
-- Recomposed materials, -- Various mosaics, -- Internal insulating and soundproofing panels
Surface No Limits:
-- Existing tiles, -- Waterproofing products, -- Heating systems, -- Cement-based screeds and mortars, -- Cement and gypsum-based plasters/renders, -- Concrete surfaces, -- Cellular concrete, -- Plasterboard, -- Brick, -- Lime and cement-based plasters/renders
-- Thermal insulation paneling systems, -- Fibro-cement slabs
Preparation of the surface
All surfaces must be dimensionally stable according to IS 1443-1972, level, cured, undamaged, compact, rigid, resistant, dry and free
from any debonding agents and from damp rising.
It is good practice to dampen highly absorbent concrete surfaces or apply a coat of Primer A Eco.
Preparation:
Creamy paste consistency for low thickness fixing and full
wettability:
--Grey ≈ 9 litres of clean water per bag
--White ≈ 10.5 litres of clean water per bag
Non-sag consistency on walls and for high thickness fixing:
--Grey ≈ 7 litres of clean water per bag
--White ≈ 8.5 litres of clean water per bag
Application
To guarantee maximum adhesion it is necessary to apply a sufficient layer of adhesive, on the back surface of the tile. Large, rectangular
sizes with sides 60 cm may require adhesive to be applied directly to the back of the tile surface. Check samples to make sure the adhesive has been transferred to the back of the material.
Create elastic expansion joints:
- ≈ 10 m2 in external applications,
- ≈ 25 m2 in internal applications,
- every 8 metres in long, narrow applications.
Facades: the surface should guarantee a cohesive tensile strength of ≥ 1.0 N/mm2.
For coverings with 60 cm side, if necessary add to the mixing water a percentage of Top Latex Eco to assess the function of the thermodynamic
strain provided by the structure.
Always apply a layer of adhesive directly on the back of the tile/stone.
Shelf life ≈ 12 months in the original packaging
Pack 25 kg
Adhesive thickness from 2 to 15 mm
Temperature of the air, substrates and materials from +5 °C to +35 °C
Pot life at +23 °C
- Grey ≈ 4 hrs
- White ≈ 4 hrs
Open time at +23 °C (BIII tile):
- Grey ≥ 60 min. EN 14411
- White ≥ 60 min. EN 14411
Correction time (BIII tile):
+23 °C ≥ 15 min. EN 14411
Foot traffic/grouting of joints at +23 °C (BIa tile):
- Grey ≈ 20 hrs EN 14411
- White ≈ 20 hrs EN 14411
Grouting in walls at +23 °C (BIa tile)
- Grey ≈ 18 hrs EN 14411
- White ≈ 18 hrs EN 14411
Ready for use at +23 °C / +35 °C (BIa tile):
- light foot traffic ≈ 3 – 2 days EN 14411
- heavy traffic ≈ 4 – 3 days EN 14411
- swimming pools (+23 °C) ≈ 14 days EN 14411
Coverage per mm thickness:
- Grey ≈ 1.3 kg/m2
- White ≈ 1.2 kg/m2
Tensile adhesion (concrete/vitrified tiles) after 28 days ≥ 3 N/mm2 EN 1348, Shear adhesion (vitrified tiles/vitrified tiles) after 28 days ≥ 3 N/mm2 ANSI A-118.4
Shear adhesion after water immersion ≥ 1 N/mm2 ANSI A-118.4
Shear adhesion after heating to +100 °C ≥ 2 N/mm2 ANSI A-118.4
Transversal deformation ≥ 2.5 mm EN 12002
Durability test:
- adhesion after heat ageing ≥ 3 N/mm2 EN 1348
- adhesion after water immersion ≥ 1 N/mm2 EN 1348
- adhesion after freeze-thaw cycles ≥ 1 N/mm2 EN 1348
- adhesion after straining cycles ≥ 1 N/mm2 SAS Technology
Working temperature from -30 °C to +90 °C

Видео Large format Tile Installation with H40 Grey Application Video канала Construction Chemical Application Videos