Modular Jam #25 - Pumping Streams
Had some fun with this one creating the house/techno chord stabs and sidechained bass set to some simple drums. Full and detailed patch notes below.
Hit like and subscribe for more videos every week and check the Patreon link if you want to support my channel.
http://www.patreon.com/divkid
PATCH NOTES -
DRUMS
Kick and snare from Mutable Instruments Peaks mixed into Mutable Instruments Frames working as a basic mixer. Hi Hat is the white noise output from a Frequency Central System X Sample & Hold + Noise module going into the Intellijel uVCA II with an envelope from the Erica Synths Polivoks EG.
BASS
Mutable Instruments Tides with shape modulation from the System X Sample and Hold and smoothness modulation from the SSF URA Sample & Hold B output.
CHORDS
This is the WTx4 chord mode on Mutable Instruments - Braids. Chord types are changing with an RYO VC Sequencer and the System X S&H modulates the wavetable Timbre.
SEQUENCING
Is done with 1 RYO VC Sequencer controlling pitch attenuated by an RYO Vertmix before going into an ADDAC 207 Quantizer. This goes to both Braids to change the root of the chords and also the bass from Tides. The second RYO VC Sequencer as mentioned above modulates the chord types. All clocks for modulation and sequencing comes from the ALM Busy Circuits Pamela's Workout. The rhythmic trigger for Braids internal envelopes modulating the internal VCA is also from Pamela's Workout in euclidean mode.
MIXING & PROCESSING
Frames mixes the 3 drums and chords and then goes into Streams in compressor mode for some gentle glueing. The bass goes into Streams and as sidechained in the bonus compressor mode against the kick. Frames output goes into one channel on the Erica Synths Fusion Series Tube Mixer. The bass comes into channel 2 and the Braids chords sound is split with a stackable and taken into a Doepfer A-199 Spring Reverb which is then brought into the third channel of the Tube Mixer before going to my soundcard.
Видео Modular Jam #25 - Pumping Streams канала DivKid
Hit like and subscribe for more videos every week and check the Patreon link if you want to support my channel.
http://www.patreon.com/divkid
PATCH NOTES -
DRUMS
Kick and snare from Mutable Instruments Peaks mixed into Mutable Instruments Frames working as a basic mixer. Hi Hat is the white noise output from a Frequency Central System X Sample & Hold + Noise module going into the Intellijel uVCA II with an envelope from the Erica Synths Polivoks EG.
BASS
Mutable Instruments Tides with shape modulation from the System X Sample and Hold and smoothness modulation from the SSF URA Sample & Hold B output.
CHORDS
This is the WTx4 chord mode on Mutable Instruments - Braids. Chord types are changing with an RYO VC Sequencer and the System X S&H modulates the wavetable Timbre.
SEQUENCING
Is done with 1 RYO VC Sequencer controlling pitch attenuated by an RYO Vertmix before going into an ADDAC 207 Quantizer. This goes to both Braids to change the root of the chords and also the bass from Tides. The second RYO VC Sequencer as mentioned above modulates the chord types. All clocks for modulation and sequencing comes from the ALM Busy Circuits Pamela's Workout. The rhythmic trigger for Braids internal envelopes modulating the internal VCA is also from Pamela's Workout in euclidean mode.
MIXING & PROCESSING
Frames mixes the 3 drums and chords and then goes into Streams in compressor mode for some gentle glueing. The bass goes into Streams and as sidechained in the bonus compressor mode against the kick. Frames output goes into one channel on the Erica Synths Fusion Series Tube Mixer. The bass comes into channel 2 and the Braids chords sound is split with a stackable and taken into a Doepfer A-199 Spring Reverb which is then brought into the third channel of the Tube Mixer before going to my soundcard.
Видео Modular Jam #25 - Pumping Streams канала DivKid
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Joranalogue on Eurorack Design Philosophy + Analog Modular Techno! // Machina Bristronica 2023AJH Synth Updated Glide + Noise // Synthfest 2018Knob + CV led FM with no menus!!! Quad Operator from Humble Audio // Superbooth 2019Daniel Miller Mute Records Modules 'Stumm' and 'Makrow' with FSS // Superbooth 2019Ginko Synthese - Flatpack DIY Case *SKIFF*Audio Damage - Sequencer 1 - Part 2Superbooth 2018 - VPME QD (quad drum synth) Spooky Action (clock generator) and Precision AdderNEW FX & MORE!!! Prok drum module updates // Superbooth 2019CFM - Superbooth 2016Superbooth 2017 - VPME Euclidean Circles & Synth BagSimple solid clock sync! The Missing Link & ML:2 (Ableton Link) // Circuit Happy at Knobcon 2023Laurentide Synthworks - VG2Eurorack design philosophy, talking to strangers on buses & more with Acid Rain TechnologyElectro Jam & New Modules from WMD at Superbooth 2018GOD's BOX Humpback // Multimode Eurorack filter with BAGS of character!A mind phased post probe abduction with Hexinverter // Superbooth 2019A conversation with Ann Annie // talking touring, starting a band plus tape loops & ambient EurorackNANO Modules MAR - Dual multi channel Eurorack mixer + tips on patching feedback and send/return FXVideo Diary - Superbooth 2016Instruōctional Live: Modular Meets Leeds 2022 // Instruo Eurorack Workshop on Performance Patching