DIY - CNC ENCLOSURE // USING LEFTOVER WOOD ONLY

In this video I built a CNC router enclosure, using only leftover wood around my shop. This machine (3018 PRO) can get really loud when it's cutting, so i had to come up with an idea to make sure the noise level is as low as possible. I added soundproof foam tape where the door is closing and extra layer of Silicone in the joints all around.
Adding acrylic glass to 2 of the sides allows me to regularly check and monitor the cut.

Featured products:
- Acrylic plexiglass (pack of 2) 42 x 29 cm (Currently out of stock on Amazon, but there are many similar items
https://www.amazon.co.uk/gp/product/B093KTCKCN/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
- 2M LED Backlight USB
https://www.amazon.co.uk/gp/product/B072KH1WPC/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
- 10mm Soundproof foam isolation tape
https://www.amazon.co.uk/gp/product/B07Z8RTZWL/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
- Spring loaded toggle latches (pack of 2)
https://www.amazon.co.uk/gp/product/B07FMVB66C/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
- Ball bearing runners (for the laptop shelf)
https://www.amazon.co.uk/gp/product/B076CSNNG8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The rest of this project is leftover 18mm Plywood, 18mm MDF and 12mm Plywood for the additional shelf underneath the enclosure.

Social media:
Facebook: https://www.facebook.com/minimal.momento/
Instagram: https://www.instagram.com/minimal.momento/

Видео DIY - CNC ENCLOSURE // USING LEFTOVER WOOD ONLY канала Minimal Momento