The mystery KNIFE that YOU DON'T KNOW! Lalau Laraw
Can you guess where this knife is from?
Let me know in the comments whether you had seen one before, or guessed where it was from, before I said.
The Lalau/laraw is a type of knife that is particular to the Aboriginal tribes of Taiwan.
Excellent article and knife kindly shared by Alex Cheng, a channel Patreon Patron:
https://historybitz.blog/2020/08/13/preliminary-classification-of-indigenous-taiwanese-knives/
Extra notes to my video from Alex Cheng:
"The grip is a rattan wrap. This particular item is a smaller example of the knife. The “Pingpu” tribes(Siraya, Makatao, Taivoan[Taiwan’s namesake], Pazeh, Taokas, and many others) were the people on the Western plains of Taiwan and had first contact with the VOC. The VOC started out trading with them for furs, but as animal numbers dwindled, the relationship slowly shifted into a predatory one, as Chinese settlers and indentured natives were put to farms. The Pingpu are often mentioned because these people have largely assimilated with the Chinese, but small clusters still hold on. Their material culture is a big mystery as it is a hard to tell what elements were borrowed from the Chinese or neighboring indigenous people. Therefore, the form of Pingpu knives is something that’s been discussed a lot on the inter webs.
My view is that they were probably the progenitors of this particular knife design, which was traded into the mountains where it further developed.
There is evidence for shield use in the Eastern coast and South of Taiwan, however, there doesn’t seem to be any evidence for shield use in the highlands where this particular knife comes from. This probably makes sense given how dense the jungle is there.
Both the ferrule and the pin is actually a modern addition. Knives were usually just burned onto the handle and left there via friction fit and eventual rust. The tang is about 1/2-2/3rd’s up the handle. Also, if you give the handle wood a little rub, you can smell camphor. However, the vast majority of examples I’ve seen actually have a socketed handle construction.
Matt is also absolutely right about the scabbard. The staples used to be strips of wood held on by rattan or rattan alone. I’ve also seen examples where rawhide is being used."
Many thanks again to Alex for this!
Видео The mystery KNIFE that YOU DON'T KNOW! Lalau Laraw канала scholagladiatoria
Let me know in the comments whether you had seen one before, or guessed where it was from, before I said.
The Lalau/laraw is a type of knife that is particular to the Aboriginal tribes of Taiwan.
Excellent article and knife kindly shared by Alex Cheng, a channel Patreon Patron:
https://historybitz.blog/2020/08/13/preliminary-classification-of-indigenous-taiwanese-knives/
Extra notes to my video from Alex Cheng:
"The grip is a rattan wrap. This particular item is a smaller example of the knife. The “Pingpu” tribes(Siraya, Makatao, Taivoan[Taiwan’s namesake], Pazeh, Taokas, and many others) were the people on the Western plains of Taiwan and had first contact with the VOC. The VOC started out trading with them for furs, but as animal numbers dwindled, the relationship slowly shifted into a predatory one, as Chinese settlers and indentured natives were put to farms. The Pingpu are often mentioned because these people have largely assimilated with the Chinese, but small clusters still hold on. Their material culture is a big mystery as it is a hard to tell what elements were borrowed from the Chinese or neighboring indigenous people. Therefore, the form of Pingpu knives is something that’s been discussed a lot on the inter webs.
My view is that they were probably the progenitors of this particular knife design, which was traded into the mountains where it further developed.
There is evidence for shield use in the Eastern coast and South of Taiwan, however, there doesn’t seem to be any evidence for shield use in the highlands where this particular knife comes from. This probably makes sense given how dense the jungle is there.
Both the ferrule and the pin is actually a modern addition. Knives were usually just burned onto the handle and left there via friction fit and eventual rust. The tang is about 1/2-2/3rd’s up the handle. Also, if you give the handle wood a little rub, you can smell camphor. However, the vast majority of examples I’ve seen actually have a socketed handle construction.
Matt is also absolutely right about the scabbard. The staples used to be strips of wood held on by rattan or rattan alone. I’ve also seen examples where rawhide is being used."
Many thanks again to Alex for this!
Видео The mystery KNIFE that YOU DON'T KNOW! Lalau Laraw канала scholagladiatoria
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Sword DISTAL TAPER: What you NEED TO KNOW with STATS of Antiques & Good ReplicasPlumbata - Roman war dartsKNIFE MAKING / CHOPPING KNIFE 수제칼 만들기 #126NORMAN HELMETS & CONTEXT! Viking, Anglo-Saxon & FrankishWas the British 1796 light cavalry sabre really such a great weapon?Why The Roman Army Used The Pilum SpearMedieval Brigandine Armour: More Details & Testing ThoughtsMaking CS GO Skeleton KnifeWHERE did Medieval Swords COME FROM?Sabre Against The Germans In WW2: Polish WZ.34 SzablaMenace of the ROMANS! Dacian FALX (with notes on the Sica & Rhomphaia) from Iamandi KnifeRapiers CAN Cut. Or Can they?Military Sword / Sabre Replicas - Are There Any Good Ones? Plus Advice On Making Them.The Strangest Homes of the Ultra RichRoman Pilum (THROWING SPEAR) vs ARMOR! Testing against shield, chainmail & plateHow To Use Every Japanese Knife | Method Mastery | EpicuriousSeax of Beagnoth- MysteryShields; Distance and speed lossWW2 Gurkha Khukuri: The Mk.3 Army Kukri by WindlassTurning a Rusty FILE into a really Pretty & SHARP KNIFE