Zoom H6: Overdubbing

Hi everyone this is John from Zoom, and I'm here to show you how to overdub on the H6 Handy Recorder.

Overdubbing is the process of recording over existing recordings to layer new parts. Begin by powering on the H6. Create an audio file you wish to overdub with. Once finished, press stop. Go to menu then scroll down to project menu. Press the scroll button to select. Scroll down to overdub then select it. Now your H6 is in overdub mode.

Please note, you will need to change inputs to record your next track.

Your recorded tracks will playback when their light is green. They will record when lit red. Enable the tracks you would like to record by pressing the respective button until it turns red. Adjust the input level then press record. Press stop when finished.If you would like to re-record your part, you can repeat the process and a new file will be created on a new take. Press fast forward or rewind to scroll between different takes. Each take will retain its specific volume, pan and stereo link settings.

Once you have recorded your final tracks you can set the balance. Press menu. Select project menu, then select project mixer. Scroll to highlight and select different parameters, including volume, panning and pitch. And then adjust to your preference. You can press the record button to reference the playback, bypassing the project mixer.When you are finished with your adjustments you are ready to mixdown your project.

Mixdown will create a stereo mix file containing audio from all of your individual parts. Your level and panning adjustments will be recorded to this new file.

Go to menu, select project menu, select mixdown, then select execute. When finished, your final mixdown can be imported onto your computer for further editing or sharing.

For more information on the H6 please go to Zoom-NA.com.

Видео Zoom H6: Overdubbing канала ZoomSoundLab