Sennheiser G2, G3 Settings For Direct to Canon DSLR (60D) Clean Audio

See the links below or visit http://thepodcastersstudio.com/gear for a list of all gear used in this video.

The key to getting clean, noise free (hiss) audio recorded into a DSLR is to remove the camera's pre-amp as much as possible from the recording chain.

Pre-amps on Canon DSLR's can create a significant amount of noise in your audio when you have to set the levels high enough to get useable levels from whatever microphone you are using.

If you are using a microphone which has the ability to set it's own gain, you are much more likely to be able to lower the DSLR's gain and replace it with the mic's for cleaner audio.

In this video I'm using a wireless Sennheiser EW 100 G2 system to send audio into a Canon 60D. I show you how to setup both the Sennheiser and the 60D to create the cleanest audio possible.

In this setup, you'll be able to use the gain on the G2 wireless transmitter and receiver to replace the gain on the DSLR.

Gear used in the making of this video:

Canon 60D http://podhelp.me/60dkit
Sennheiser ew100 G2 Wireless Lapel Microphone http://podhelp.me/Sennkit
Canon Normal EF 50mm f/1.4 USM http://podhelp.me/canon501point4
Sigma 18-50mm 2.8 - 4.5 Lens (mounted to the 60D) http://podhelp.me/sigma18-50os (discontinued) Here's a substitute http://podhelp.me/sig17-70
Manfrotto 701 HDV Tripod http://podhelp.me/701hdv055xbkit

Видео Sennheiser G2, G3 Settings For Direct to Canon DSLR (60D) Clean Audio канала Ray Ortega