Ford Focus Front Hub / Wheel Bearing Replacement (other vehicles too) 2000 - 2011

This DIY provides the basic procedure in replacing the Front Hub and Wheel Bearing in a 2000 - 2011 Ford Focus without removing the Steering Knuckle and without using a standing Hydraulic Press Machine. The bearing in the Focus is press fitted into the Steering Knuckle and the Wheel Hub press fitted into the Inner Race of the Wheel Bearing.
If you'd like to make a donation to the channel, please follow the link below: https://paypal.me/HardlyMoving?locale.x=en_US

Parts and Tools:

Moog Front Wheel Bearing & Hub Assembly (00 - 11 Ford Focus 2.3L & 2.0L):
https://amzn.to/2UGnds2

Front Wheel Bearing Adapter Puller Kit W/Grade 8 Drive Bolt
https://amzn.to/2Uvstio

Slide Hammer Puller Set:
https://amzn.to/2FazwI6

Channellock 927 8-Inch Retaining Ring Plier:
https://amzn.to/2JpK3TI

Powered Impact Tool (not the one I used, but less expensive quality corded version):
https://amzn.to/2F57ldk

Milwaukee 2767-22 Fuel High Torque 1/2" Impact Wrench w/ Friction Ring Kit (This is the super high torque impact tool that generates over 1400 lbs of nut busting torque! A lot more than the one used in this video!)
https://amzn.to/2MzfKIW

As an Amazon associate, I earn from qualifying purchases. Thank you for your support!

Please Subscribe: https://goo.gl/x6fySQ

Видео Ford Focus Front Hub / Wheel Bearing Replacement (other vehicles too) 2000 - 2011 канала Hardly Moving Productions