DIY Leg press machine

This easy to make machine only took a day to construct and is easy to follow with the instructions provided. Since the machine has been built out of bolts and batten screws, it's able to be disassembled very easily!
The machine is also very affordable, with it costing only $150 to make the whole process even more satisfying💵😊

Leg press platform attachment photo⬇️
https://linksharing.samsungcloud.com/liC0DRPKje4O
Materials
*1 x 2.4m dressed pine 70 x 70mm
*1 x 4.8m treated pine 70 x45mm
*1 x 2.4m galv bar 30mm x 3mm
*1 x 3m galv RHS steel 30mm x 1.6mm
*1 x 1m galv RHS steel 40mm x 1.6mm
*1 x 2.4m pine panel board 30mm x 600mm
*1 x 2m length of chain
*2 x 100mm hairline hinges
*50 x 65mm batten screws
*20 x 100mm bolts 6mm
*Nuts and washers for bolts
*Oil spray

Disclaimer: This machine is to be built by a person of competent knowledge and experience in building projects. Build at own risk, and I take no responsibility of harm or injury as a result of poor workmanship and decision for going ahead with the construction of this leg press machine.

Good luck🤙

Видео DIY Leg press machine канала MattNunan