Satellite Dish Motor - How to set up a Free Satellite TV Dish!
THE HAPPY SATELLITE NERD EPISODE 99
In this video I set up a MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR! -(US $134.07)
Using USALS (Universal Satellites Automatic Location System) to perfectly align all of the Satellites in the Geostationary ark of the Satellites, to receive the #FreeSatelliteTV Channels.
You can get one of these and a dish system at https://www.facebook.com/pg/FreeSatelliteTV1/shop
www.FreeSatelliteTV.Net
#tech #FTA #FreeToAirSatellite
With the SG2100 motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 120 cm satellite dish.
Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB coaxial lead to the mount. Only one coaxial cable is needed for installation.
https://www.facebook.com/commerce/products/3167984379953238/
HH motor on Ebay $199.00 http://ebay.us/loNWj6
FEATURES:
Fits all popular dish with 42mm tube
Special Design for any Receiver with DiSEqC 1.2
Only One Coaxial Cable Control
Go To X Function
High Efficiency
Compact Structure
Ultra Low Noise
Adjustable Hardware Limits
Easy Installation with LED Indicator
Manual EAST / WEST button
For Dish up to 1.2M
Three important parameters are required to correctly align a motorized c band (TVRO) dish for viewing the entire satellite arc or Clarke Belt.
1. Azimuth Angle (True South/Not Magnetic South);
2. Elevation Angle;
3. Declination Angle;
Use a compass to point your dish south and use the chart below to find your "modified" polar mount elevation and declination angle.
Once you start locking satellite transponders, fine tune your azimuth, elevation and declination angles until you peak all satellite signals. Lock down your dish.
https://www.tvrosat.com/resources.html
https://www.DishPointer.com/
To find Channels and Transponder frequencys http://SatHint.com/ and https://www.LyngSat.com/
-----------------------------------------------------------------------------------------------------------------
Go to the Dish Alignment table in your manual or on https://www.tvrosat.com/resources.html
Enter your Latatude and Elivation on the Motor. Mine was Lattude 44 and my Elivation was 46
For my Deinclination Angle on the DISH I subtracted the Declination Angle
(Degrees) 6.07° from the Elevation Angle (Degrees)44.66°
44.66° - 6.07° = 37.96 (37.96 Deinclination angle on the dish)
Use a compas to find your true south location.
go to www.DishPointer.com and find your latitude and longitude. Enter that into your receivers USALS (Universal Satellites Automatic Location System) under your motor settings.
The plumb pole is real critical with these setups.
And to find your true south satellite go to the one closest to your highest most southern part of the ark (True South should be 0 on the motor) on where your Longitude is set to the closest sat you can lock to that.
In my case I am at 76.48 West so I moved the dish's Azimuth to 87 west. And then adjusted the Azimuth until I got signal on the receiver.
I did adjust the Declination angle on the dish to fine tune the signal by a hair and got better signal. Moved it half a baby finger and lost signal.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Need a VPN
Using the Express VPN Service Please Sing up here and Click on my referral link.
https://www.linkev.com/?a_fid=freesatellitetv
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
please consider supporting my work
https://www.paypal.com/donate/?token=QKzEirXJqq0FTbnGEmr3zZUYnrEJk9b7E5JktI6qe_RWThkac4gqudDIUwhd7Ugo-cMjfm&country.x=CA&locale.x=CA
https://www.patreon.com/RobbieStrike
Learn about Satellite and other things by sitting back and binging on these playlists
https://www.youtube.com/user/ottawaoctane/playlists
Buy This Stuff - https://www.facebook.com/pg/FreeSatelliteTV1/shop
https://www.youtube.com/user/ottawaoctane/videos
https://www.facebook.com/RobbieStrikeVideos/
https://twitter.com/robbiestrike3
(c) Robbie Strike 2020 http://www.RobbieStrike.com
www.FreeSatelliteTV.net
Intro: (0:00)
Dish Pointer website: (0:46)
SatFinder Light Android app for you phone: (2:08)
SatHint and websites that list free channels!; (2:42)
Satellite Dish Motor unboxing: (4:06)
Satellite Finder Kit: (8:11)
Attaching the satellite dish to the motor: (9:30)
Setting up a motorized satellite dish on a Tripod: (10:40)
Dish moving to different satellite positions: (13:05)
Calculate you Deinclination Angle: (13:29)
True South: (14:56)
Set up USALS on a satellite receiver:(15:57)
Galaxy 19 97 west: (16:59)
Satellite Receiver Settings: (17:45)
Satellite switches DiSEqC and 22k and Splitters: (19:12)
Don't let this happen to you: (23:06)
Dish moving across the geostationary ark: (23:19)
Channels: (26:25)
Видео Satellite Dish Motor - How to set up a Free Satellite TV Dish! канала Robbie Strike
In this video I set up a MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR! -(US $134.07)
Using USALS (Universal Satellites Automatic Location System) to perfectly align all of the Satellites in the Geostationary ark of the Satellites, to receive the #FreeSatelliteTV Channels.
You can get one of these and a dish system at https://www.facebook.com/pg/FreeSatelliteTV1/shop
www.FreeSatelliteTV.Net
#tech #FTA #FreeToAirSatellite
With the SG2100 motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 120 cm satellite dish.
Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB coaxial lead to the mount. Only one coaxial cable is needed for installation.
https://www.facebook.com/commerce/products/3167984379953238/
HH motor on Ebay $199.00 http://ebay.us/loNWj6
FEATURES:
Fits all popular dish with 42mm tube
Special Design for any Receiver with DiSEqC 1.2
Only One Coaxial Cable Control
Go To X Function
High Efficiency
Compact Structure
Ultra Low Noise
Adjustable Hardware Limits
Easy Installation with LED Indicator
Manual EAST / WEST button
For Dish up to 1.2M
Three important parameters are required to correctly align a motorized c band (TVRO) dish for viewing the entire satellite arc or Clarke Belt.
1. Azimuth Angle (True South/Not Magnetic South);
2. Elevation Angle;
3. Declination Angle;
Use a compass to point your dish south and use the chart below to find your "modified" polar mount elevation and declination angle.
Once you start locking satellite transponders, fine tune your azimuth, elevation and declination angles until you peak all satellite signals. Lock down your dish.
https://www.tvrosat.com/resources.html
https://www.DishPointer.com/
To find Channels and Transponder frequencys http://SatHint.com/ and https://www.LyngSat.com/
-----------------------------------------------------------------------------------------------------------------
Go to the Dish Alignment table in your manual or on https://www.tvrosat.com/resources.html
Enter your Latatude and Elivation on the Motor. Mine was Lattude 44 and my Elivation was 46
For my Deinclination Angle on the DISH I subtracted the Declination Angle
(Degrees) 6.07° from the Elevation Angle (Degrees)44.66°
44.66° - 6.07° = 37.96 (37.96 Deinclination angle on the dish)
Use a compas to find your true south location.
go to www.DishPointer.com and find your latitude and longitude. Enter that into your receivers USALS (Universal Satellites Automatic Location System) under your motor settings.
The plumb pole is real critical with these setups.
And to find your true south satellite go to the one closest to your highest most southern part of the ark (True South should be 0 on the motor) on where your Longitude is set to the closest sat you can lock to that.
In my case I am at 76.48 West so I moved the dish's Azimuth to 87 west. And then adjusted the Azimuth until I got signal on the receiver.
I did adjust the Declination angle on the dish to fine tune the signal by a hair and got better signal. Moved it half a baby finger and lost signal.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Need a VPN
Using the Express VPN Service Please Sing up here and Click on my referral link.
https://www.linkev.com/?a_fid=freesatellitetv
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
please consider supporting my work
https://www.paypal.com/donate/?token=QKzEirXJqq0FTbnGEmr3zZUYnrEJk9b7E5JktI6qe_RWThkac4gqudDIUwhd7Ugo-cMjfm&country.x=CA&locale.x=CA
https://www.patreon.com/RobbieStrike
Learn about Satellite and other things by sitting back and binging on these playlists
https://www.youtube.com/user/ottawaoctane/playlists
Buy This Stuff - https://www.facebook.com/pg/FreeSatelliteTV1/shop
https://www.youtube.com/user/ottawaoctane/videos
https://www.facebook.com/RobbieStrikeVideos/
https://twitter.com/robbiestrike3
(c) Robbie Strike 2020 http://www.RobbieStrike.com
www.FreeSatelliteTV.net
Intro: (0:00)
Dish Pointer website: (0:46)
SatFinder Light Android app for you phone: (2:08)
SatHint and websites that list free channels!; (2:42)
Satellite Dish Motor unboxing: (4:06)
Satellite Finder Kit: (8:11)
Attaching the satellite dish to the motor: (9:30)
Setting up a motorized satellite dish on a Tripod: (10:40)
Dish moving to different satellite positions: (13:05)
Calculate you Deinclination Angle: (13:29)
True South: (14:56)
Set up USALS on a satellite receiver:(15:57)
Galaxy 19 97 west: (16:59)
Satellite Receiver Settings: (17:45)
Satellite switches DiSEqC and 22k and Splitters: (19:12)
Don't let this happen to you: (23:06)
Dish moving across the geostationary ark: (23:19)
Channels: (26:25)
Видео Satellite Dish Motor - How to set up a Free Satellite TV Dish! канала Robbie Strike
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
FTA Satellite Systems Part 2: Installation And Adjustments. Lets get those signals!Free Satellite TV with Dumpster Dived DishDiSEqc Motor (motorised dish) move your dish automatically according to channel (Part 1)Align your satellite dish in 1 minute !! With the free application "satellite finder"Starlink Satellite Internet: Installation demo and tipsGalaxy 19 at 97.0°W BlindScan - Over 200 Free To Air Satellite TV Channels4 Brilliant Uses for an old SATELLITE DISH!USALS Satellite Dish Motor Setup (Universal Satellites Automatic Location System) #FreeSatelliteTVmotorised satellite tv installation guide using STAB-USALS by HISATmotor moving dish movingSatellite InstallationsSTAB USALS Universal Satellite Automatic Location SystemFree To Air Satellite Starter Dish #FreeSatelliteTV #FTASatellite #SatelliteChannelsFreesat V8 Satellite Finder DVB S2 Receiver Digital Signal Meter Outdoor Signal Detector - ReviewMotorized Dish Antenna Installation Process || कोई भी सॅटॅलाइट सेट करे 2 सेकंड में || Part 2Why you can't use a Dish Network Dish for #FreeSatelliteTV or Free To Air SatelliteHow to Setup & Align a Satellite Dish For Astra 2 @ 28eBalanszírozás antenna controlHow to Setup & Scan your FTA Free to Air Satellite System