Schwaben Cooling Fin Tool | Straighten Bent Fins | 20/20 Tool Review
I test out the Schwaben Cooling Fin Tool on the A4 B7 radiator, condenser and intercooler fins in effort to straighten and clean the blocked and bent ones.
Although the tool has 6 sets of combs with teeth that can fit into fin spacings at 8, 9, 10, 12, 14 and 15 fins/inch, only the 14 would slide into any of the B7 coolers - the side mount intercoolers.
I found the tool hard to use due to the below average method of manufacturing on the combs and the overall effectiveness of the tool to properly bend back bent fins was very low. All said, I probably damaged more fins than I fixed.
I hope there is a future version of this tool I can test that has metal teeth that are a bit thinner. I also think if the handle was curved or the combs bent as a claw in the opposite direction, the usability would be better.
Sadly, it's no better than using a flat head screwdriver.
Видео Schwaben Cooling Fin Tool | Straighten Bent Fins | 20/20 Tool Review канала Figure It Audi
Although the tool has 6 sets of combs with teeth that can fit into fin spacings at 8, 9, 10, 12, 14 and 15 fins/inch, only the 14 would slide into any of the B7 coolers - the side mount intercoolers.
I found the tool hard to use due to the below average method of manufacturing on the combs and the overall effectiveness of the tool to properly bend back bent fins was very low. All said, I probably damaged more fins than I fixed.
I hope there is a future version of this tool I can test that has metal teeth that are a bit thinner. I also think if the handle was curved or the combs bent as a claw in the opposite direction, the usability would be better.
Sadly, it's no better than using a flat head screwdriver.
Видео Schwaben Cooling Fin Tool | Straighten Bent Fins | 20/20 Tool Review канала Figure It Audi
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Vintage Westinghouse 5,000 BTU Air Conditioner | Straightening the Coils](https://i.ytimg.com/vi/SGvvuQjB6AU/default.jpg)
![How to clean a radiator, and Restoration a radiator](https://i.ytimg.com/vi/5fr7XIg9TXY/default.jpg)
![THE BEST NO SCRUBBING ATV UTV RZR Dirtbike Radiator cleaning Suzuki LTR 450](https://i.ytimg.com/vi/QJnksqiL8ts/default.jpg)
![Condenser Fin Comb Training](https://i.ytimg.com/vi/mwzwboqN5Cw/default.jpg)
![Aluminum MCHX Repair Procedure](https://i.ytimg.com/vi/-TOSB5acHbo/default.jpg)
![How To Straighten a Bent Dirt Bike Radiator](https://i.ytimg.com/vi/Qisz9Qick7k/default.jpg)
![Amazing Technique of restoration radiator | radiator repairing and rust remover part 1](https://i.ytimg.com/vi/j02QbMEUZ0o/default.jpg)
![Repairing heat exchanger fin damage : Radiators, Intercoolers, Oil Coolers, etc](https://i.ytimg.com/vi/qLK1pkiSa5g/default.jpg)
![RV Air Conditioner Repair. How to Straighten Condenser Coil Fins. (And How to Prevent It)](https://i.ytimg.com/vi/TvDZWrvvyew/default.jpg)
![How to Clean Rusty Radiator | Restoration a Radiator with Small Tools](https://i.ytimg.com/vi/48PqCnJlwjg/default.jpg)
![Doing This Will Make Your Car's Cooling System Last Forever](https://i.ytimg.com/vi/uHoU-rxXurA/default.jpg)
![หวีแปรงคอยล์เย็น-คอยร้อนของเครื่องปรับอากาศ มาดูกัน](https://i.ytimg.com/vi/y8zJsm4PqoY/default.jpg)
![How To Install an Aftermarket KOYO Radiator](https://i.ytimg.com/vi/3yHJuWATfO4/default.jpg)
![How to make a coils fins tool part 2](https://i.ytimg.com/vi/y7-UtdJm1A8/default.jpg)
![How to Repair Rust on Your Car Without Welding. Rust Removal](https://i.ytimg.com/vi/GyfkM5Q8JbU/default.jpg)
![Unsafe Furnace hack butcher sabotage WORST EVER](https://i.ytimg.com/vi/G9qpakzUS30/default.jpg)
![Bad HVAC Capacitor | I Make a Big Mistake](https://i.ytimg.com/vi/8bkbbezIHjc/default.jpg)
![Repairing Aluminium Radiator with JB Weld With Results](https://i.ytimg.com/vi/P2fYoMdDpGk/default.jpg)
![How to Make an Intercooler](https://i.ytimg.com/vi/ouT60EFyNtM/default.jpg)
![Dirty Radiator Cleaning Condensed](https://i.ytimg.com/vi/StxTeCl8Ihc/default.jpg)