Setting a diamond and welding it safe
This channel set diamond platinum eternity ring came to me with a diamond missing so I had to force back it's setting, set a new diamond in and weld platinum over it. This video shows all that, plus the cleaning up work and there is a photo of the finished job at the end.
The PUK 3S was set to 30% 6ms because it was platinum, if it was gold it would have been set to 25% 6ms because platinum usually needs more power to weld it. The diamond is very secure with the platinum welded over the edge and after filing/buffing then scorpering the inside edge, it matched the rest of the ring.
Видео Setting a diamond and welding it safe канала tribletman
The PUK 3S was set to 30% 6ms because it was platinum, if it was gold it would have been set to 25% 6ms because platinum usually needs more power to weld it. The diamond is very secure with the platinum welded over the edge and after filing/buffing then scorpering the inside edge, it matched the rest of the ring.
Видео Setting a diamond and welding it safe канала tribletman
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Welding a diamond rubover and claw settingWeld repair bracelet swivel claspWeld retip on an opalPesho Diamonds Cut Down settingSpawanie oprawek okularowych PUK 4.1Channel setting toolHow to Set a Round Center Stone in a Ring with Platinum Prongs | GIAPUK Welding - argonChannel Setting Square DiamondsI TURN 2 HEX NUTS into a 1 Ct DIAMOND RINGLampert PUK - Trainingsvideo 11 - Ringweite SteinringWeld repair to an aquamarine pendantHow To Spot Fake Diamonds? (Diamond Authenticity Test)Welding a corner claw to build it upTIG Welding Copper - Making a Copper Drinking MugJewelry Welding Demo Reel - Orion Jewelry WeldersPLATINUM 1 CARAT DIAMOND RINGStone Setting Tips and Tricks with Blaine LewisHow I cut perfect lines and channels in a ringSQUARE PAVÉ - HOW TO SET 16 DIAMONDS IN 18KT WHITEGOLD - THE DIAMOND SETTER