How To and Guide to Pitching a Air Driveaway Awning

As demonstrated by our partners from Outdoor Revolution for the latest Leisure Outlet Video Tips filming day.

Just a few simple tips and hints on how to quickly and easy it is to pitch an air driveaway awning. Just remember the following 9 steps:

1) On the ground, square the awning to the campervan or motorhome with cowl facing the side of the vehicle

2) Connect the cowl (tunnel) to the vehicle, either via a figure of eight driveaway kit or by using the throw over straps

3) Starting pegging at the rear, slightly under the van for an improved seal against the side of the vehicle, don't start at the front!

4) Loosely peg the four corners so that the awning is square against the side of your vehicle

5) Start inflating each air tube

6) Peg out the rest of the pegging points and correctly tension around the awning

7) Peg out and tension the guylines

8) Finish by pegging out the Endurance Storm Straps, you can move these around the awning to improve bracing depending on which way the wind is blowing

9) That's it! Time to enjoy a cup of tea and relax!

We hope you get the perfect pitch each time, thanks for watching!

__________

Website: https://www.leisureoutlet.com
Facebook: https://www.facebook.com/leisureoutlet
Twitter: https://www.twitter.com/leisureoutlet

Видео How To and Guide to Pitching a Air Driveaway Awning канала Leisure Outlet