Luna Bean Keepsake DIY Hand Casting Kit Tutorial | How To Hand Casting

Thank you for choosing Luna Bean Keepsake Hands Casting Kit. Before you begin, make sure to visit https://www.castingkeepsakes.com/lunabean for the most up-to-date instructions.

Looking for instructions for a specific part of the casting process? Use the chapters below to skip ahead!

0:00 Introduction
1:04 5 Helpful tips
2:42 Step 1 Making the Mold
6:54 Step 2 Pouring the Casting Stone
8:48 Step 3 Finishing Your Statue

Here’s what’s included with your Luna Bean’s Keepsake Hands Casting Kit:
• 1 - Step 1 molding powder
• 1 - Step 2 casting stone
• 1 - Molding bucket
• 1 - Detailing pin
• 1 - Wooden stick
• 1 - De-molding stick
• Sandpaper
• Instructions

Here are a few items that are not included, but recommended:

• A Mixing bowl
• A Mixing spatula
• A Whisk
• A Measuring cup
• Distilled water (distilled water ensures that there are no minerals in the water that may disrupt the bonding process or the color-changing feature of the molding powder)
• Paper towels
• And Clay or a similar material to artificially thicken long nails to reduce the chances of breaking during the de-molding process

5 helpful tips for best results:

Tip 1: Due to the nature of the casting procedure, it can be difficult to get the casting stone up into the finger portions of the mold if the fingers are curved upward (such as in a partial fist). Air tends to get trapped in the fingertips if in this position and the stone usually cannot fill them properly. The fingers will then appear to have been sliced off. It is okay to curve the fingers as long as the fingertips are overall at the lowest point in the molding bucket or to have a tight fist or firm grasp on another hand, etc.

Tip 2: Regarding fingernails: If the subject has fingernails that they wish to be preserved in the casting, place a small amount of clay (or similar) behind the nails prior to making the mold to make them about 2-3 times thicker than normal. This will help prevent the nails from breaking off the finished statue and the added thickness is hardly noticeable.

Tip 3: It is best to have an extra person available that is not involved in the casting process to read the instructions, mix molding powder, and to tend to any children that may be involved in the process. Also, although some wiggling is okay, it could be difficult to mold a young child’s hand if he or she is cranky or upset.

Tip 4: Add the powder to the water (not the other way around). Lack of water at any time can cause the material to bond and set prematurely.

Tip 5: Both the Step 1 molding powder and the Step 2 casting stone react with water in order to perform their functions. Therefore, if you have any questions about the pH or the level of minerals (the hardness) of your tap water, it is best to use distilled water.

We would love to see your work, so make sure to post your photos on social media and tag #LunaBeanCasting

Видео Luna Bean Keepsake DIY Hand Casting Kit Tutorial | How To Hand Casting канала Luna Bean Casting