Загрузка страницы

Xerox WorkCentre 7535 start and boot problems

The boot bug disappeared as I was re-installing a clean firmware but the boot problem re-appeared a day after as I was configuring the printer via the web browser by accessing its IP address.

I turned both power buttons to OFF and removed the 220V power plug for ten seconds. Removed the Ethernet cable. Re-connected the Ethernet cable and 220V plug. Turned both switches to ON and the boot procedure was normal.

Any iDeas anyone out there?

Regards,
Black Baron

Copyright © Black Baron. All rights, ideas and patents reserved.

Видео Xerox WorkCentre 7535 start and boot problems канала Black Baron
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
14 сентября 2021 г. 16:58:55
00:00:29
Яндекс.Метрика