Designing a Bathroom Correct Vanity Toilet Position
It is very easy to design a bathroom wrong. This is normally achieved by fitting products that are too big for the space available, or fitting products too tight to a wall. This video demonstrates a 50cm wide vanity toilet unit.
The maths to support this example
The vanity toilet unit measures 50cm wide. The toilet pan measures 36cm wide. When the toilet is fitted correctly to the center of the vanity box, there is an overall gap of 14cm. That equals 7cms either side of the toilet pan.
The mistake people make
IF you were to fit the vanity unit flush to the wall, when sitting on the toilet you would have a space of only 7cm between the toilet pan and wall for your leg. This is not enough space.
What we would recommend
We would strongly recommend leaving at least 7cm between the wall and the side of the vanity unit. This will give your leg 14cm space when sitting on the toilet. IF you leave a gap of 12cm between the vanity unit and the wall, you now have a space to hide the toilet brush.
Bathrooms are so easy to get right, understanding the space and the size, then fit products that fit the space available.
Bathrooms made affordable, designed correctly, professionally fitted.
Visit our showroom at 408 Radford Rd, Coventry, CV6 3AB
Tel 07550 003 003
Visit our website : https://www.coventrybathrooms.co.uk/
#bathroomFittersCoventry #coventryBathrooms
Видео Designing a Bathroom Correct Vanity Toilet Position канала Coventry Bathrooms Ltd Bathroom Fitters
The maths to support this example
The vanity toilet unit measures 50cm wide. The toilet pan measures 36cm wide. When the toilet is fitted correctly to the center of the vanity box, there is an overall gap of 14cm. That equals 7cms either side of the toilet pan.
The mistake people make
IF you were to fit the vanity unit flush to the wall, when sitting on the toilet you would have a space of only 7cm between the toilet pan and wall for your leg. This is not enough space.
What we would recommend
We would strongly recommend leaving at least 7cm between the wall and the side of the vanity unit. This will give your leg 14cm space when sitting on the toilet. IF you leave a gap of 12cm between the vanity unit and the wall, you now have a space to hide the toilet brush.
Bathrooms are so easy to get right, understanding the space and the size, then fit products that fit the space available.
Bathrooms made affordable, designed correctly, professionally fitted.
Visit our showroom at 408 Radford Rd, Coventry, CV6 3AB
Tel 07550 003 003
Visit our website : https://www.coventrybathrooms.co.uk/
#bathroomFittersCoventry #coventryBathrooms
Видео Designing a Bathroom Correct Vanity Toilet Position канала Coventry Bathrooms Ltd Bathroom Fitters
Показать
Комментарии отсутствуют
Информация о видео
30 сентября 2020 г. 13:10:33
00:01:41
Другие видео канала
HOW TO FIX A CONCEALED TOILET - Plumbing TipsHOW TO INSTALL A CONCEALED TOILET CISTERN - Back To The Wall - Plumbing TipsSmall Bathroom Remodel Time Lapse [Converting a Half Bath to Full Bath]Bathroom converted to a shower room with vanity bathroom storage3 Designer Hacks for Teensy Tiny Bathrooms!How to fit a back to wall WC toilet unit.Toilet and Sink Combo for Small Bathrooms | Vanity Unit & Wc UnitDon't Have a Bathroom Installed Until You've Watched This Part 2HOW TO INSTALL A VANITY UNIT WASH BASIN - Bathroom IdeasAccessing the water cistern on a Cook & Lewis Ardesio vanity & toilet unitHow to change a pedestal basin for a vanity basin unit.All About Shower Niches!How to install/fit a bathroom sink vanity unit, tap and waste. Plumbing for DIY enthusiasts.EXTREME BATHROOM MAKEOVER | DIY Guest Bathroom Renovation | Julie KhuuHow To Tile Over TileDARK GRAY TILE EXPANDED SHOWER REMODEL by Stoneunlimited Kitchen and Bath, #stoneunlimited15 Small Bathroom IdeasHow to connect toilet basin combo unit.Swapping back to wall toilet faultEnsuite Bathroom - START TO FINISH Construction of Master / Attached Bathroom for Loft Conversion