How to create your own material in COMSOL Multiphysics | Laser Modeling, Heat Transfer - Part 1

In this video, you learn how to create your own material in COMSOL Multiphysics. The tutorial forms part of a video series aimed at demonstrating laser machining fundamentals using finite element analysis (FEA).

==============================================================================

This demonstration is timestamped as follows:
0:00 - 0:55 | Introduction of material properties and equations
0:56 - 5:24 | Inserting property groups in COMSOL Multiphysics
5:25 - 8:10 | Differences in types of functions (i.e. analytics, piecewise, interpolation)
8:11 - 13:50 | Density
13:51 - 16:48 | Thermal conductivity
16:49 - 20:08 | Dynamic viscosity
20:09 - 21:21 | Surface tension
21:22 - 22:55 | Modulus of elasticity
22:56 - 24:16 | Poisson ratio
24:17 - 26:07 | Coefficient of thermal expansion
26:08 - 27:42 | Transferring the functions into the Material Property Group
27:43 - 34:41 | Heat capacity
34:42 - 36:23 | Saving the material in the User Defined Library

==============================================================================

Article Reference: Vora, H.D., Santhanakrishnan, S., Harimkar, S.P. et al. One-dimensional multipulse laser machining of structural alumina: evolution of surface topography. Int J Adv Manuf Technol 68, 69–83 (2013). https://doi.org/10.1007/s00170-012-4709-8

For more information or consultation:
E-mail: chemsimcorner@gmail.com / info@nemantu.co.za

Видео How to create your own material in COMSOL Multiphysics | Laser Modeling, Heat Transfer - Part 1 канала Chemical Simulation Corner