How to Install a Fuel Filter on a NSX (FULL DIY)
Learn how to replace your aging fuel filter in your 91-05 Acura/Honda NSX. The service interval for the fuel filter is 4 years or 60k miles. It's an inexpensive part and relatively easy to change with very few tools needed. If you have any questions, feel free to post in the comments!
Parts Required:
16060-SL0-000: Fuel Filter set, comes with Fuel Filter and 5 washers.
Recommended Tools:
17 & 19mm Tekton Stubby Wrenches: https://www.tekton.com/stubby-combination-wrench-set-wrn01170
Torque Wrench capable of 20ft*lbs & 9 ft*lbs.
17mm & 12mm deep sockets for your Torque Wrench.
1/4" Drive Flex Head Ratchet: https://amzn.to/48f1WL9
10mm 1/4" drive socket (standard size)
0:00 - Introduction
0:28 - Overview
1:35 - Tools Required
2:41 - Relieve Fuel Pressure
3:35 - Remove Fuel Filter Bracket
4:42 - Loosen 17mm Banjo Bolts
6:21 - Comparing Old & New Filters
6:39 - Double Wrench Method to Loosening the Banjo Bolts
7:28 - Replace the Washers
8:47 - Installing the New Fuel Filter
10:09 - Torquing the Banjo Bolts
11:44 - Installing the Fuel Filter Bracket
12:32 - Install the Gas Cap
12:37 - Conclusion
+As an Amazon Associate I earn from qualifying purchases.
+ Instagram: https://www.instagram.com/_chrislum_/
+ Facebook: https://www.facebook.com/chrislumnsx
#NSX #acura #honda
Видео How to Install a Fuel Filter on a NSX (FULL DIY) канала Chris Lum
Parts Required:
16060-SL0-000: Fuel Filter set, comes with Fuel Filter and 5 washers.
Recommended Tools:
17 & 19mm Tekton Stubby Wrenches: https://www.tekton.com/stubby-combination-wrench-set-wrn01170
Torque Wrench capable of 20ft*lbs & 9 ft*lbs.
17mm & 12mm deep sockets for your Torque Wrench.
1/4" Drive Flex Head Ratchet: https://amzn.to/48f1WL9
10mm 1/4" drive socket (standard size)
0:00 - Introduction
0:28 - Overview
1:35 - Tools Required
2:41 - Relieve Fuel Pressure
3:35 - Remove Fuel Filter Bracket
4:42 - Loosen 17mm Banjo Bolts
6:21 - Comparing Old & New Filters
6:39 - Double Wrench Method to Loosening the Banjo Bolts
7:28 - Replace the Washers
8:47 - Installing the New Fuel Filter
10:09 - Torquing the Banjo Bolts
11:44 - Installing the Fuel Filter Bracket
12:32 - Install the Gas Cap
12:37 - Conclusion
+As an Amazon Associate I earn from qualifying purchases.
+ Instagram: https://www.instagram.com/_chrislum_/
+ Facebook: https://www.facebook.com/chrislumnsx
#NSX #acura #honda
Видео How to Install a Fuel Filter on a NSX (FULL DIY) канала Chris Lum
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to get Professional Results with Alcantara Door Inserts for $150 on your NSX! (FULL DIY)What’s in YOUR trunk 😆 #honda #nsx #shortsRecaro ABE Seat Belt Update | NSXDixcel Brake Rotors | NSXNSX LegacyHow to Replace Manual Transmission Fluid on a NSX (Full DIY)How to Install a Tire Plug in a Tesla Model Y (Full DIY)How to: NSX CRF Lightweight Crank Damper Pulley Shield | 1991-2005 (Full DIY)Goodbye Taitec Center Exit Exhaust | NSXGreat Scott! We need to back to 1991 Marty!! #acura #honda #nsx1 Piece Billet Aluminum NSX Targa Strut Tower Bar from Grey Market USAHow to Install Spoon Monoblock Brake Calipers on a NSX (Reupload) (FULL DIY)Don't get Scammed! Spotting Instagram Car Parts Scam AccountsHow to Install a Stealth License Plate Bracket on a NSX | FULL DIY | 1991-2005How to NSX Door Handle Emblem Replacement | 91-05 NSX (Full DIY)Extended Studs, Wheel Bearings & Carbon6 Titanium Ball JointsHow to install S2000 GReddy Hood Dampers | Full DIYHow to: 09-13 Honda Fit Wheel Bearings & Studs (Full DIY)How to Install Mugen Pedals on your NSX (the most secure way) | Full DIY | 1991-2005How to Install a SOS Oil Pressure Sensor Upgrade Kit on a NSX (Full DIY)